topic Re: Background link not visible in original color in Project data & BIM

Background link not visible in original color

AFranch — Fri, 03 Jan 2025 12:46:19 GMT

In ArchiCAD26, the active floor is displayed in original color and the background link is displayed in grayscale. There was no other plan. where could the switch be? Video card NVIDIA GeForce RTX 3070 8043 MB

Re: Фоновая ссылка не видна в исходном цвете

Miha_M — Mon, 13 Mar 2023 17:12:20 GMT

International forum, english please,

You have a "trace reference / ghost story" display settings active. You have two sliders available, the upper one controls the reference story display visibility (intensity), the lower one controls the active drawing display intensity. You also have buttons for each of those, which you can use to set the display color (original vs. uniform in an rgb combination).

Where is the problem? Your picture shows the background in original color, but with low intensity, which most likely shows the traced reference in grey color. Try moving the upper slider.

Re: Фоновая ссылка не видна в исходном цвете

AFranch — Mon, 13 Mar 2023 18:20:56 GMT

they appear on my wall on the background link and on the active floor, but they are displayed differently. This is the crux of the issue. And of course I moved all the sliders.
Again. The wall on the background link should be colored like it is on the actual floor.

Re: Background link not visible in original color

Laszlo Nagy — Mon, 13 Mar 2023 22:06:23 GMT

I see you are using a View as Trace Reference. Any chance that there is a Graphic Override set in that View that is causing this monochrome display for it?

Re: Background link not visible in original color

Barry Kelly — Tue, 14 Mar 2023 02:00:22 GMT

Or if it is not a Graphic Override, is the view is set to use a greyscale pen set?

Barry

Re: Background link not visible in original color

Laszlo Nagy — Tue, 14 Mar 2023 03:05:29 GMT

Or is the View using a Renovation Filter where all element Pens are overwritten to that gray Pen because of their Renovation Status?