topic Re: Zone stamp show different information on different sheets in Project data & BIM

Zone stamp show different information on different sheets

Steve — Fri, 19 May 2023 21:56:41 GMT

I am looking to turn on and off content visibility of room zones per sheet. ie: occupancy for our code sheet; room finish for our room sheets, and just room name and number on all other sheets. Thanks

Re: Zone stamp show different information on different sheets

Steve Jepson — Thu, 08 Aug 2019 18:09:34 GMT

that's a tricky one.
I think it should be possible by use of the Scale Sensitivity Display for the Zone. Zone Content at 1:50 for example can be different than at 1:100.
Different Views would have different scale sensitivity but you may be able to compensate for that by resizing the Drawing in Layout. ?

Re: Zone stamp show different information on different sheets

Lingwisyer — Fri, 09 Aug 2019 01:54:29 GMT

If you did do that, you will have to be wary of your MVO as that might change with your scale if it is not set.

Ling.

Re: Zone stamp show different information on different sheets

Steve Jepson — Fri, 09 Aug 2019 05:47:11 GMT

Good point Ling,
I haven't tried to do it yet. I am not 100% sure if if works or not. Better option might be to forget doing that with the zone stamp and use some labels. ?

Re: Zone stamp show different information on different sheets

DGSketcher — Fri, 09 Aug 2019 10:08:14 GMT

There is an MVO controlled zone stamp available from Applecore Designs (UK). I haven't used it myself, but it may be worth investigating and there is a demo version.

https://store.applecoredesigns.co.uk/global-zone-stamp

Re: Zone stamp show different information on different sheets

Erwin Edel — Fri, 09 Aug 2019 11:21:19 GMT

The Dutch subscription library offers this with Model View Options. You can set the zones to follow Model View Options and control for each model view which information the zone shows, which font size, how the text is alligned, etc etc

Just a matter of setting up views with different Model View Options after that.

So it is definitely possible with the right zone stamps and Model View Option library parts.