topic Hotlink Module Dose Not Work with Trace? in Project data & BIM

Hotlink Module Dose Not Work with Trace?

Anonymous — Fri, 26 May 2023 07:01:08 GMT

Hi,
I have hotlinked a two story (pln) building, floors -1 & 1, but when I am in 1st floor of host using the Trace "Below Current Story" the -1 story Does Not show up. Layers and elements are all on. In project Map floor -1 is visible & in the original Module (pln) it shows!
Any thoughts why?
Joseph

Re: Hotlink Module Dose Not Work with Trace?

Anonymous — Tue, 20 Oct 2009 01:07:13 GMT

Do you have another floor between -1 and 1 ?
If so it can't show up in TRACE.
And if you, you can right-click at floor -1 and choose show as trace ref....
Hope it helps....
cheers

Re: Hotlink Module Dose Not Work with Trace?

Laszlo Nagy — Tue, 20 Oct 2009 12:22:32 GMT

In the host file if you go down to that Floor, does it show?
Or after you used that -1 floor as Trace Reference, click the Switch Reference with Active button in the Trace Reference Palette. Does it show then?

Re: Hotlink Module Dose Not Work with Trace?

Anonymous — Wed, 21 Oct 2009 20:08:33 GMT

Sorry Sorry,
Problem was that I did not click on Reset to Default Position