topic Re: Layer Nightmare - bug? in Project data & BIM

Layer Nightmare - bug?

DennisG — Fri, 26 May 2023 09:11:57 GMT

Greetings fellow Talkers.

Had the following happen to me recently - discovered it today.

Was working on some detail modules over the past few days; both as MOD files, and as imported Hotlinks with associated views in the PLN file.

Once I went back to working on the floor plans, I discovered, to my horror, that somewhere along the line every single bit of data that I had worked on up until that point had been put on the ArchiCAD layer - none of my view sets worked. In fact, it looks like the only layers remaining are the ones brought in by the module file; I went from having about 50 layers to having about 10 layers; and all but the module info ended up on the ArchiCAD layer.

I remember choosing to have the module's layers put onto the ArchiCAD layer, thinking that I'll select and change them to other layers later; what I definitely did not choose was to have all my work put onto the ArchiCAd layer, with the exception of a module that I'd imported.

Does this sound like a bug, or did I inadvertantly toggle some gawd-awful excuse for a setting somewhere, causing this to occur? Please let me know what you think so I will know how to avoid this in the future.

Thanks,

Dennis Glynn AIA

Re: Layer Nightmare - bug?

Djordje — Mon, 01 Dec 2003 13:56:09 GMT

DennisG wrote:
Had the following happen to me recently - discovered it today.

///

I remember choosing to have the module's layers put onto the ArchiCAD layer, thinking that I'll select and change them to other layers later; what I definitely did not choose was to have all my work put onto the ArchiCAd layer, with the exception of a module that I'd imported.

This does sound like a bug; which ArchiCAD?

Re: Layer Nightmare - bug?

Aussie John — Mon, 01 Dec 2003 21:44:50 GMT

Did you crash? I have had most my layers dissappear once. Another time all elemants in the section view had moved to the archicad layer.
I think it was version 7. I think I was pretty mad

Re: Layer Nightmare - bug?

Djordje — Tue, 02 Dec 2003 05:31:44 GMT

Aussie wrote:
Did you crash? I have had most my layers dissappear once. Another time all elemants in the section view had moved to the archicad layer.
I think it was version 7. I think I was pretty mad

AFAIR this WAS a problem until 8.0 V2/R2. That is why I asked Dennis which ArchiCAD.

Please guys - ALWAYS include your version and service release, as well as OS data when you report a problem!

Re: Layer Nightmare - bug?

DennisG — Tue, 02 Dec 2003 15:54:59 GMT

I apologize, guys - forgot to include my snazzy signature, which would tell you that yes, I am using the latest version of the software that is available. I uninstalled the earlier versions of AC 8, and installed fresh from the CD which arrived within the past two weeks.

And no, this was not the result of a crash in ArchiCAD. I have experienced unstable performance in PM 3.1 - it crashes more often than I'd like.

Let's see - I'll X out this box, and hopefully my signature will appear below.

Thanks all,

Dennis