topic Re: Dimensions in Rotated Plan Disappearing in Non-Rotated V in Project data & BIM

Dimensions in Rotated Plan Disappearing in Non-Rotated View

Anonymous — Tue, 30 May 2023 10:39:08 GMT

Hello,

We have a project in ArchiCAD 18 where we have set up two extra floor plan views rotated to be orthogonal to buildings that are off axis from the rest of the project.

When we dimension in these rotated views (same layer set/dimension settings/filter/etc - the only difference is to the settings is the "Zooming"), the dimensions are not appearing when we navigate back to the original floor plan view.

Any thoughts on how to fix this? Thanks

Re: Dimensions in Rotated Plan Disappearing in Non-Rotated V

Bruce — Wed, 24 Feb 2016 03:38:53 GMT

When you say filters, do you mean structure filter, or renovation filter...or both?

Have you tested this by activating the view that works, then resetting the rotation (ie not by clicking on other view)?

Re: Dimensions in Rotated Plan Disappearing in Non-Rotated V

Anonymous — Tue, 15 Mar 2016 18:44:57 GMT

Hi Bruce,

Yes, when I say filters, I mean both structural and renovation. The views are the exact same (the rotated one was copied from the original) except for the "Zooming" setting.

And yes, we tested using the original view and rotating it temporarily - this does not make the dimensions appear.

For now, we have resigned to simply using the original view and rotating it temporarily to do our dimensioning.