topic Re: Phantom Grid Lines in Project data & BIM

Phantom Grid Lines

Gerald Hoffman — Tue, 30 May 2023 10:37:59 GMT

I have never had this before. As you see there are 3 extra grid lines in the North Elevation that do not show up in the South Elevation or Sections that run the same way. Even though the Grid layer is unlocked these 3 extra Grid lines seem to be locked and all settings are greyed out. The setting indicate they are on the same layer as the rest of the Grid lines.

I have tried drawing a new North Elevation with the Elevation tool and they still show up. If I use a Section tool to create the elevation they are not there. I can do this but this is not the ideal solution.

Has anyone had this problem before and were you able to fix it?

Thanks,

Re: Phantom Grid Lines

Gerald Hoffman — Tue, 07 Mar 2017 19:56:00 GMT

A correction to the above post. The Elevation drawn with the Section tool does now have the extra phantom Grid Lines. This is weird.

Re: Phantom Grid Lines

Gerald Hoffman — Tue, 07 Mar 2017 20:08:15 GMT

Disregard my request for help. I have solved the problem.

As it turns out I had a module of a cottage placed on the site which also had Grid Lines. These are showing up in the Elevation even though the Module is on a hidden layer. I'm not sure why that would be but I just changed my North Elevation to a limited depth and they disappeared.

Maybe this should be left up in case anyone else had this happen. Up to the administrator.

Cheers,

Re: Phantom Grid Lines

Aaron Bourgoin — Tue, 07 Mar 2017 22:28:16 GMT

can you use the Goodie called "Intersections in Layer Combinations" to sort out the problem?