https://community.graphisoft.com/t5/Project-data-BIM/Layer-combinations-cut-fills/m-p/217078#M6613 Thanks for answer, will try with renovation filter! Thu, 19 Jan 2012 13:00:09 GMT Anonymous 2012-01-19T13:00:09Z https://community.graphisoft.com/t5/Project-data-BIM/Layer-combinations-cut-fills/m-p/217076#M6611 <DIV class="actalk-migrated-content"><T>Maybe someone could help... <BR /> The story: I have different floor plans and I`m curious how can I make, for example, that on the fire plan specific wall fills are shown as red, green or anykind without making a change to the main floor plan. Basically, how to work with layer combinations and adjust cut fill as needed? <BR /> <BR /> Thanks in advance!</T></DIV> Tue, 30 May 2023 10:43:08 GMT https://community.graphisoft.com/t5/Project-data-BIM/Layer-combinations-cut-fills/m-p/217076#M6611 Anonymous 2023-05-30T10:43:08Z https://community.graphisoft.com/t5/Project-data-BIM/Layer-combinations-cut-fills/m-p/217077#M6612 I'd have thought that using different pen sets for each view might be easier, or if you're working in AC15 you can try making the Renovation filter do it for you. Thu, 19 Jan 2012 09:17:06 GMT https://community.graphisoft.com/t5/Project-data-BIM/Layer-combinations-cut-fills/m-p/217077#M6612 Anonymous 2012-01-19T09:17:06Z https://community.graphisoft.com/t5/Project-data-BIM/Layer-combinations-cut-fills/m-p/217078#M6613 Thanks for answer, will try with renovation filter! Thu, 19 Jan 2012 13:00:09 GMT https://community.graphisoft.com/t5/Project-data-BIM/Layer-combinations-cut-fills/m-p/217078#M6613 Anonymous 2012-01-19T13:00:09Z