topic Re: Metal Cladding in Project data & BIM

Metal Cladding

Anonymous — Tue, 30 May 2023 11:16:00 GMT

Hi there im wondering if anyone can give me an idea of how can i do a metal cladding composite structure layers, what are the layers? i'm kinda have an idea but i just want to see how you guys would do it. I'm posting a view of the building, you can take a look at the finishes. Thanks people
lovetrain

Re: Metal Cladding

Anonymous — Fri, 28 May 2004 01:02:50 GMT

I did a project recently that had a metal cladding for siding. I'm not shure if this is what you are looking for but this is what I did. I made a thick outer composite layer with a metal exterior material. Then I used small walls as a SEO operator on a hidden layer to give it a corrugated look.

Re: Metal Cladding

Djordje — Fri, 28 May 2004 09:29:06 GMT

Mark wrote:
I did a project recently that had a metal cladding for siding. I'm not shure if this is what you are looking for but this is what I did. I made a thick outer composite layer with a metal exterior material. Then I used small walls as a SEO operator on a hidden layer to give it a corrugated look.

You can also use the cladding library parts; however, that adds quite a few polygons ...

IMHO, except for extreme close ups, a good 3D fill and a good texture do the job quite well.

Re: Metal Cladding

Anonymous — Fri, 28 May 2004 13:37:45 GMT

HI Mark

Thanks for you help, but what im looking for is the real construction layers like the metal sheets, metal frames, insulations, structure, blocks, and then finishes, hope you know what i mean ihihihihi thanks.

lovetrain

Re: Metal Cladding

Anonymous — Fri, 28 May 2004 13:41:10 GMT

Hi Mark

I wonder if you can post for me the detail drawing of the metal cladding that you did? thanks

Re: Metal Cladding

Anonymous — Sat, 29 May 2004 01:10:52 GMT

This is one of the details from that project. The metal cladding was horizontal and a square profile. This dosent sound like what you are looking for.

Re: Metal Cladding

Aussie John — Sun, 30 May 2004 22:50:32 GMT

in detail section I use a custom made line to show the metal deck profile