topic Re: You want the overlapping bottom line to be invisible. What should I do? in GDL

You want the overlapping bottom line to be invisible. What should I do?

LeeJaeYoung — Wed, 08 Jun 2022 23:38:10 GMT

You want the overlapping bottom line to be invisible.
What should I do?

FILL "Background" POLY2_B 4, 1+2+4+32, 19,19, WHA, -_thk,1, WHA-_wid, -_thk,1, WHA-_wid, _thk,1, WHA, _thk,1

Re: You want the overlapping bottom line to be invisible. What should I do?

A_ Smith — Fri, 03 Jun 2022 05:43:25 GMT

Try to set different DRAWINDEX for that poly (if it overlaps bottom lines) and project2 or what you have there

Re: You want the overlapping bottom line to be invisible. What should I do?

Kristian Bursell — Mon, 06 Jun 2022 04:38:12 GMT

What is the top element made of?

lines (line2 etc) will always show through polys but polys will hide polys based on the order or the code.

Re: You want the overlapping bottom line to be invisible. What should I do?

LeeJaeYoung — Mon, 06 Jun 2022 04:53:53 GMT

I made them all FILL "Background" POLY2_B 4, 1+2+4+32,19,19,.

I used drawindex but to no avail.

Re: You want the overlapping bottom line to be invisible. What should I do?

Peter Baksa — Wed, 08 Jun 2022 08:08:41 GMT

Hi,

use status code 0 for the edge that which don't want to see.

Re: You want the overlapping bottom line to be invisible. What should I do?

vdentello — Mon, 20 Jun 2022 14:49:21 GMT

I achieved that a while ago with DRAWINDEX quite easily, you just have to state it before each part to set up it's order, and it's easily done.

Re: You want the overlapping bottom line to be invisible. What should I do?

Kristian Bursell — Mon, 20 Jun 2022 23:20:03 GMT

Perhaps the problem is your frame_fill includes "32" which makes the fill a cut fill. I only ever use "1+2+4" generally.

Or perhaps its more simple like the fill pens you have set are transparent.

try using different fills and playing around with the pens and also draw a line (using Archicad line tool) and a fill (using fill tool) under the placed object to see if they also show through. This will help you isolate the error.

DM me if you would like to send the object through for me to have a quick look.