topic Re: zone stamp in hotlink in GDL

zone stamp in hotlink

LeeJaeYoung — Sun, 17 Jul 2022 09:33:01 GMT

I made a zone stamp.
I put an on/off setting in it.
Created in unit.mod file and hotlinked to building A.pln
Here the on/off set in unit.mod works.

But when I hotlink building A.pln to All.pln, everything turns on.
How can I turn it off in All.pln?

it is unit.mod.

building A.pln

ALL.pln

Re: zone stamp in hotlink

Peter Baksa — Mon, 18 Jul 2022 10:07:48 GMT

Hi,

I suspect the problem is that zone categories are attributes, which get merged into the host file. If the zone category's default stamp library part is changed, it overwrites the imported module's stamps, and the parameters of those stamps reset to the default parameters. The same would happen if you changed a hotlinked line type.

Is it possible that another imported module overwrote the zone category that uses the custom stamp? Try using the same stamp for the same categories in each module, or use different category for different stamps.

Another option is using zone labels.

Re: zone stamp in hotlink

LeeJaeYoung — Mon, 18 Jul 2022 10:36:19 GMT

What you are saying is that it is turned off in building.pln where the mod is hotlinked, but it cannot be initialized in all.pln where the pln file is loaded.

Re: zone stamp in hotlink

Peter Baksa — Tue, 19 Jul 2022 08:02:54 GMT

I am trying to say that it may be initialized to default in ALL.pln when the zone category attributes from two different hotlinks have the same ID but different zone stamps, or the attribute's zone stamp is changed manually after import.

Re: zone stamp in hotlink

LeeJaeYoung — Tue, 19 Jul 2022 08:05:28 GMT

I am a beginner and my English is short.
It's asking if you can get it out.
can't it?
What do I need to fix?

Re: zone stamp in hotlink

Peter Baksa — Tue, 26 Jul 2022 10:25:00 GMT

Please forward your question to support, they will be able to help in your native language. I think this is not a GDL programming question, but using hotlinks and attributes.

Re: zone stamp in hotlink

LeeJaeYoung — Thu, 28 Jul 2022 18:23:29 GMT

I was asking how far the properties of hotlink can be transmitted.
Basically, the concept of link has been thought that the content of b is transmitted to the end. But Archicad wasn't like that. So, I decided that Archicad is designed as a single hotlink, and the properties of a can only be transmitted up to b. This is because the attribute a in a->b->c is not passed to c.

Question 1. So I asked if there was any way to pass up to c.
Because if not, I have to think a->b<-c.

Re: zone stamp in hotlink

Peter Baksa — Fri, 29 Jul 2022 09:28:08 GMT

Yes, a->b->c should work.

Another possibility for error is changing the zone category's library part after placing the hotlinks.

We would need to see your files to be sure.

Re: zone stamp in hotlink

LeeJaeYoung — Sun, 31 Jul 2022 08:23:12 GMT

When I ctrl+M+shift after hotlink, the door change... - Graphisoft Community

It's the same, so I need your opinion.

Re: zone stamp in hotlink

Peter Baksa — Fri, 19 Aug 2022 09:32:24 GMT

From looking at the pictures, I think they are not the same issue, since the door has a problem with a one-level hotlink too (a->b).