status code - am I chosing wrong status?

A_ Smith — Wed, 15 Sep 2021 07:27:15 GMT

Hi.
I can't get why when I chose status 8 - visible only surface, without any lines - I still get horizontal lines. Shape - FRISM_ with angle=0

steps=12
resol steps*3
R2=1
EPS=0.0001
m=2
top_material=m
bottom_material=m
side_material=m
hill_material=m

!STATUS_____________________________
si=8
!____________________________________

hill_height=R2/3
thickness=hill_height

for i=0 to 360+EPS step 360/steps*0.5
	put r2*cos(i), r2*sin(i), si
next i

FPRISM_ top_material, bottom_material, side_material, hill_material,
nsp/3, thickness, 0, hill_height, get(nsp)

I thought horizontal lines should be for status si=9,11...15. But not for si=10 and of course (as I see I am wrong) for si=8

Re: status code - am I chosing wrong status?

Peter Baksa — Mon, 07 Dec 2020 15:23:49 GMT

Hi,

use HPRISM to control hill edge visibility.

Re: status code - am I chosing wrong status?

A_ Smith — Tue, 08 Dec 2020 06:54:45 GMT

Greetings.
Thank you Peter Baksa.

topic Re: status code - am I chosing wrong status? in GDL

status code - am I chosing wrong status?

Re: status code - am I chosing wrong status?

Re: status code - am I chosing wrong status?