Wallblock Edges

Lingwisyer — Thu, 02 Mar 2023 09:40:33 GMT

Hi all,

Anyone have some insight into how to get WALLBLOCK2{2} working? Trying to reference the Plaster Turn macro does not give much insight...

Not enough edges in generatrix.

WALLBLOCK2{2} 5, 2, 2,8 * (bLocalFill | bFitToSkinFill) + 32 * bFitToSkinFill + 128 * (bLocalFill & not(bFitToSkinFill)), ActSkinFillPen, ActSkinFillBkgPen, 0, 0, -sin(dirAngle),-cos(dirAngle), -gs_fw_side_left*cos(dirAngle),gs_fw_side_left*sin(dirAngle), 0, A/2, 0, 1, A/2 - gs_fw_side_left_i, 0, 1, A/2 - gs_fw_side_left_i, -WIDO_SILL, 1, A/2, -WIDO_SILL, 1, A/2, 0, -1

Ling.

Re: Wallblock Edges

AllanP — Fri, 03 Mar 2023 00:53:12 GMT

I get the same error

Not enough edges in generatrix.

when i change the code to have the points not all overlapping then it works,(by adding 1 to opposite corners)

WALLBLOCK2{2} 5, 2, 2,8 * (bLocalFill | bFitToSkinFill) + 32 * bFitToSkinFill + 128 * (bLocalFill & not(bFitToSkinFill)), ActSkinFillPen, ActSkinFillBkgPen, 0, 0, -sin(dirAngle),-cos(dirAngle), -gs_fw_side_left*cos(dirAngle),gs_fw_side_left*sin(dirAngle), 0, A/2, 0, 1, A/2 - gs_fw_side_left_i-1, 0, 1, A/2 - gs_fw_side_left_i-1, 1-WIDO_SILL, 1, A/2, 1-WIDO_SILL, 1, A/2, 0, -1

i think you just need to ensure that all the coordinate points form a valid polygon.

if WIDO_SILL = 0 or gs_fw_side_left_i = 0 then it will not work.

also,

the frame fill, fill pens etc should be set to what you want.

the default values of 0 will give you no visible fill, so set fills/edges/etc.

i hope that helps.

topic Re: Wallblock Edges in GDL

Wallblock Edges

Re: Wallblock Edges