topic Door leaf undercut in Libraries & objects

Door leaf undercut

David E — Wed, 24 May 2023 07:39:54 GMT

I generally size door openings via their leaf size as this is how I generate my door schedules, however I have issues with the ‘leaf undercut’ setting in the door parameters. Traditionally with undercuts I would expect the value of this gap to be added to the door leaf rather than taken off i.e. the wall opening size increases to take account of the whole door being lifted up to accommodate the floor finish.

Re: Door leaf undercut

Steve Jepson — Sat, 25 Mar 2023 01:37:32 GMT

Where is there a "leaf undercut" setting ? I don't think I have seen that.

Re: Door leaf undercut

Mahmoud Qenawi — Sat, 25 Mar 2023 15:03:13 GMT

Leaf Undercut is an option you can find in settings panel for some types of doors but i think it's not available in USA version, see this post:

https://community.graphisoft.com/t5/Design-forum/ArchiCAD25-Door-Leaf-Undercut-Parameter-not-available/m-p/368749#

Re: Door leaf undercut

Christophe Fortineau — Tue, 28 Mar 2023 06:49:35 GMT

Hello,

In France we are able to cut each door leaf 5cm upper the floor with this parameter :