https://community.graphisoft.com/t5/Libraries-objects/Cutting-in-3D/m-p/164123#M15760 Thank you so much Piotr. Fri, 29 Jun 2012 06:08:00 GMT Cosminn 2012-06-29T06:08:00Z https://community.graphisoft.com/t5/Libraries-objects/Cutting-in-3D/m-p/164121#M15758 <DIV class="actalk-migrated-content"><T>Hello everyone, please help me with a 3d script for this situation. I have attached a PDF file. Thanks a lot.</T></DIV> Thu, 28 Jun 2012 18:32:44 GMT https://community.graphisoft.com/t5/Libraries-objects/Cutting-in-3D/m-p/164121#M15758 Cosminn 2012-06-28T18:32:44Z https://community.graphisoft.com/t5/Libraries-objects/Cutting-in-3D/m-p/164122#M15759 In such situation You may use plain PRISM command (pick one best suitable there are couple variants of it)<BR /> <BR /> At first draw a slab with the cutting You need...then save it to GDL - now You can analyse the script and put the veariables in place of values.<BR /> <BR /> Alternatively draw 2 slabs one will be the base the socond will be cutting - then save to gdl...<BR /> now one of the prism You may change to CUTPOLY<BR /> <BR /> But cutply have to be first...then the base and CUTEND after the base<BR /> <BR /> Refer to the GDL manual for the proper syntax<BR /> <BR /> You will have to add proper ROT before anyting<BR /> <BR /> and DEL 1 (if one transformation like Rot is there)<BR /> <BR /> Alternatively You may make Solid operation to the slabs You draw, than save it to GDL - than of course change the proper values to parematers.<BR /> <BR /> <BR /> Best Regards,<BR /> Piotr Thu, 28 Jun 2012 19:00:24 GMT https://community.graphisoft.com/t5/Libraries-objects/Cutting-in-3D/m-p/164122#M15759 Piotr Dobrowolski 2012-06-28T19:00:24Z https://community.graphisoft.com/t5/Libraries-objects/Cutting-in-3D/m-p/164123#M15760 Thank you so much Piotr. Fri, 29 Jun 2012 06:08:00 GMT https://community.graphisoft.com/t5/Libraries-objects/Cutting-in-3D/m-p/164123#M15760 Cosminn 2012-06-29T06:08:00Z