https://community.graphisoft.com/t5/Libraries-objects/AC-15-Window-Bug/m-p/185149#M16400 <DIV class="actalk-migrated-content"><T>It appears that the windows (or at least this one) are not drawing correctly. Setting for this window is 7'-4", and the window hole is correct. However, it leaves a four inch gap at the bottom. If I turn on the sill, stool and apron, those elements fill in the hole. <BR /> <BR /> However, the window should extend to the botttom of the wall hole, and the trim should go around the outside of the hole. I've tried all the settings that I thought would be applicable; I even thought maybe the window was open in the 3D settings. Can't make it work. <BR /> <BR /> Thanks Tom</T></DIV><BR /><IMG src="http://community.graphisoft.com/t5/image/serverpage/image-id/67461i1E3FB9B445094330/image-size/large?v=v2&amp;px=999" border="0" alt="windowbug.jpg" title="windowbug.jpg" /> Wed, 24 May 2023 10:36:33 GMT Tom Krowka 2023-05-24T10:36:33Z https://community.graphisoft.com/t5/Libraries-objects/AC-15-Window-Bug/m-p/185149#M16400 <DIV class="actalk-migrated-content"><T>It appears that the windows (or at least this one) are not drawing correctly. Setting for this window is 7'-4", and the window hole is correct. However, it leaves a four inch gap at the bottom. If I turn on the sill, stool and apron, those elements fill in the hole. <BR /> <BR /> However, the window should extend to the botttom of the wall hole, and the trim should go around the outside of the hole. I've tried all the settings that I thought would be applicable; I even thought maybe the window was open in the 3D settings. Can't make it work. <BR /> <BR /> Thanks Tom</T></DIV><BR /><IMG src="http://community.graphisoft.com/t5/image/serverpage/image-id/67461i1E3FB9B445094330/image-size/large?v=v2&amp;px=999" border="0" alt="windowbug.jpg" title="windowbug.jpg" /> Wed, 24 May 2023 10:36:33 GMT https://community.graphisoft.com/t5/Libraries-objects/AC-15-Window-Bug/m-p/185149#M16400 Tom Krowka 2023-05-24T10:36:33Z