Balauster

Anonymous — Fri, 11 Nov 2011 18:17:07 GMT

Hi! I Have an old object from archicad 4.5 How I can change the parameters? or if I can sostitute with a similar object. Any help will be appreciated. I have very little knowledge of GDL. Thanks
This is the script:

! Name : balusL.GDL
! Date : Saturday, July 13, 1996
! Version : 4.50
! Written by ArchiCAD

A_ = 48
N_ = -1
K~ = 31'-8.9643"
L~ = -24'-2.9325"
M~ = 5'
N~ = 9'-0.5469"
O~ = 0'-0.9435"
P~ = 5'
T~ = 3
U~ = 90.0
Q_ = 9'
!!Slab-011
!!Slab-011
PEN 2
material m
addy -2 1/2"
addx -2 1/2"
brick 5",5",2 3/4"
del top
addz 2 3/4"
roty -90
resol n

revolve 77,360,15,

0', 0', 1,
0', 0'-2.1250", 1,
0'-0.0414", 0'-2.0836", 1,
0', 0'-2.1250", 1,
0'-0.4824", 0'-2.1248", 1,
0'-0.4448", 0'-2.0872", 1,
0'-0.4824", 0'-2.1248", 1,
0'-0.6477", 0'-1.7406", 1,
0'-0.9680", 0'-1.4715", 1,
0'-1.3750", 0'-1.3750", 1,
0'-1.8153", 0'-1.2608", 1,
0'-2.0000", 0'-1.1250", 1,
0'-1.9773", 0'-1.1023", 1,
0'-2.0000", 0'-1.1250", 1,
0'-2.2500", 0'-1.1250", 1,
0'-2.2147", 0'-1.0897", 1,
0'-2.2500", 0'-1.1250", 1,
0'-2.3572", 0'-0.9198", 1,
0'-2.5869", 0'-0.8906", 1,
0'-2.7421", 0'-1.0625", 1,
0'-2.7853", 0'-1.0193", 1,
0'-2.7421", 0'-1.0625", 1,
0'-3.0000", 0'-1.0625", 1,
0'-3.0340", 0'-1.0285", 1,
0'-3.0000", 0'-1.0625", 1,
0'-3.1250", 0'-1.2790", 1,
0'-3.3750", 0'-1.2790", 1,
0'-3.5784", 0'-0.9465", 1,
0'-3.7134", 0'-0.9741", 1,
0'-4.2934", 0'-1.5900", 1,
0'-5.4107", 0'-2.0833", 1,
0'-6.8093", 0'-2.0164", 1,
0'-8.0323", 0'-1.6783", 1,
0'-9.4428", 0'-1.1558", 1,
0'-10.7500", 0'-1.0000", 1,
0'-10.7890", 0'-0.9610", 1,
0'-10.7500", 0'-1.0000", 1,
0'-10.7500", 0'-1.1250", 1,
0'-10.7899", 0'-1.0851", 1,
0'-10.7500", 0'-1.1250", 1,
0'-10.9311", 0'-1.1828", 1,
0'-11.0689", 0'-1.3172", 1,
0'-11.2500", 0'-1.3750", 1,
0'-11.2951", 0'-1.3299", 1,
0'-11.2500", 0'-1.3750", 1,
0'-11.2500", 0'-1.5000", 1,
0'-11.2932", 0'-1.4568", 1,
0'-11.2500", 0'-1.5000", 1,
0'-11.3125", 0'-1.5167", 1,
0'-11.3913", 0'-1.5763", 1,
0'-11.5184", 0'-1.6092", 1,
0'-11.6450", 0'-1.5747", 1,
0'-11.7858", 0'-1.4460", 1,
1'-0.0584", 0'-1.2092", 1,
1'-0.4033", 0'-1.0631", 1,
1'-0.8126", 0'-1.1220", 1,
1'-1.1124", 0'-1.4353", 1,
1'-1.1529", 0'-1.3948", 1,
1'-1.1124", 0'-1.4353", 1,
1'-1.2374", 0'-1.4353", 1,
1'-1.2729", 0'-1.3997", 1,
1'-1.2374", 0'-1.4353", 1,
1'-1.2923", 0'-1.5679", 1,
1'-1.4249", 0'-1.6228", 1,
1'-1.5575", 0'-1.5679", 1,
1'-1.6770", 0'-1.4483", 1,
1'-1.7549", 0'-1.4317", 1,
1'-1.8019", 0'-1.5000", 1,
1'-1.8398", 0'-1.4621", 1,
1'-1.8019", 0'-1.5000", 1,
1'-2.2001", 0'-1.5915", 1,
1'-2.5585", 0'-1.8836", 1,
1'-2.9014", 0'-2.0824", 1,
1'-3.2500", 0'-2.1250", 1,
1'-3.2035", 0'-2.0785", 1,
1'-3.2500", 0'-2.1250", 1,
1'-3.2500", 0', 1

del top
addy -2 1/2"
addx -2 1/2"
addz 18"
brick 5",5",1 1/2"

Re: Balauster

David Maudlin — Sat, 12 Nov 2011 13:30:36 GMT

Giuseppe:

The code looks like an object saved from the floor plan and the only parameters in the script are for the resolution (n) and material (m), all else is hard coded. Since this object is not parametric, what aspects of it do you want to control? If it is just the overall size, then look at adding the MUL command at the top of the script and after the "del top" line (see the GDL Reference Guide), otherwise you need to substitute the hard dimensions for parameters in the script.

David

Re: Balauster

Anonymous — Sun, 13 Nov 2011 00:09:38 GMT

Thank you David, a friend of mine from Italy, "Zio Bob" (real name is Roberto Corona) told me the lines that I needed to remove and add in the script. It works like a charm.

Thanks

topic Re: Balauster in Libraries & objects

Balauster

Re: Balauster

Re: Balauster