https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240176#M18 Think the issue with low response is that a lot of the users have a local version of the library, rather than the INT library.<BR /> <BR /> For me, for example, I have a Dutch translation, so it won't be of much use to you to show settings etc<BR /> <BR /> There are options to have a threshold extend under the door though. But not with the type you are showing now. That one would even 'block' the door if it opened in the direction of that treshold and I do not believe we have that as an option for doors (it is there for windows though).<BR /> <BR /> Some options just do not exist. Like having the threshold run up the frame, like the more traditional stone work ones (at least in Netherlands). Mon, 01 Feb 2021 14:48:24 GMT Erwin Edel 2021-02-01T14:48:24Z https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240170#M12 <DIV class="actalk-migrated-content"><R>Guys, this has been driving me mad - and the only way I've managed to get this to work is by using Cadimage doors objects (which are stupidly expensive). <BR /> I need to show the threshold/frame detail going completely under the door leaf. The options icon alludes to the fact that you can, but I have no idea how to get this square behind to show. Any ideas?</R></DIV> Wed, 24 May 2023 08:39:57 GMT https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240170#M12 Anonymous 2023-05-24T08:39:57Z https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240171#M13 Highlighted part in red, in my screenshot by the way. Fri, 29 Jan 2021 09:27:30 GMT https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240171#M13 Anonymous 2021-01-29T09:27:30Z https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240172#M14 Anyone? <EMOJI seq="1f642"></EMOJI> Fri, 29 Jan 2021 15:52:12 GMT https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240172#M14 Anonymous 2021-01-29T15:52:12Z https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240173#M15 What door object are you using (showing in your screen shot) and what language version are you using?<BR /> <BR /> You show the settings for the sill, there should be another page where you can change the settings for the frame as well.<BR /> Without knowing the object name I would have to go hunting, and the AUS library may even be different to the one you have.<BR /> <BR /> <BR /> Barry. Mon, 01 Feb 2021 01:47:01 GMT https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240173#M15 Barry Kelly 2021-02-01T01:47:01Z https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240174#M16 It's the 'Door 24' object in the INT library, the only sizing options I have in the frame options page is this: <BR /> <BR /> <BR /> Which would allow me to reduce any of the side/top frames to 0 (hence gone) but no way to add the frame underneath. Any ideas? Mon, 01 Feb 2021 10:13:55 GMT https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240174#M16 Anonymous 2021-02-01T10:13:55Z https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240175#M17 I don't have access to 24 at the moment but I had a look at Door 23.<BR /> I don't use this door at all but I don't see any settings for a bottom frame.<BR /> I think the first image you show is a little misleading by Graphisoft.<BR /> <BR /> There is a threshold but that will be at least the full width of the wall if extended both sides and it is not possible to make it the same as the frame width.<BR /> I don't see a way off adding a bottom frame, but as I say I don't use that library part.<BR /> Maybe someone who does may have a suggestion?<BR /> <BR /> <BR /> Barry. Mon, 01 Feb 2021 12:14:22 GMT https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240175#M17 Barry Kelly 2021-02-01T12:14:22Z https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240176#M18 Think the issue with low response is that a lot of the users have a local version of the library, rather than the INT library.<BR /> <BR /> For me, for example, I have a Dutch translation, so it won't be of much use to you to show settings etc<BR /> <BR /> There are options to have a threshold extend under the door though. But not with the type you are showing now. That one would even 'block' the door if it opened in the direction of that treshold and I do not believe we have that as an option for doors (it is there for windows though).<BR /> <BR /> Some options just do not exist. Like having the threshold run up the frame, like the more traditional stone work ones (at least in Netherlands). Mon, 01 Feb 2021 14:48:24 GMT https://community.graphisoft.com/t5/Libraries-objects/How-do-I-show-a-door-frame-beneath-the-leaf-as-shown-in-the/m-p/240176#M18 Erwin Edel 2021-02-01T14:48:24Z