https://community.graphisoft.com/t5/Libraries-objects/Zone-Stamp-wrong-measured-area/m-p/211464#M18969 Michael, yes on the update zones. I just now fixed the issue which is that there was a nearly unperceivable gap in the enclosing walls. When properly joined this issue went away. Thanks for you response. Scott Fri, 01 Oct 2010 17:17:22 GMT Scott Bulmer 2010-10-01T17:17:22Z https://community.graphisoft.com/t5/Libraries-objects/Zone-Stamp-wrong-measured-area/m-p/211462#M18967 <DIV class="actalk-migrated-content"><T>Greetings all, using the Masterzone (formerly known as Superzone-2), the Measured Area calculated value is incorrect. In the attached screenshot you can see the Measured Net Area is 221 SF, however the Measured Area returns an incorrect value of 6,000 SF. Any ideas will be greatly appreciated.<BR /> Thanks, Scott</T></DIV><BR /><IMG src="https://community.graphisoft.com/t5/image/serverpage/image-id/8540i7D8A4D4B5B9C4CA4/image-size/large?v=v2&amp;px=999" border="0" alt="Measure Zone.png" title="Measure Zone.png" /> Thu, 30 Sep 2010 21:59:03 GMT https://community.graphisoft.com/t5/Libraries-objects/Zone-Stamp-wrong-measured-area/m-p/211462#M18967 Scott Bulmer 2010-09-30T21:59:03Z https://community.graphisoft.com/t5/Libraries-objects/Zone-Stamp-wrong-measured-area/m-p/211463#M18968 At first glance, 221 sq ft looks small, but 6000 sq ft looks big. did you run an update zone? Fri, 01 Oct 2010 17:06:26 GMT https://community.graphisoft.com/t5/Libraries-objects/Zone-Stamp-wrong-measured-area/m-p/211463#M18968 Anonymous 2010-10-01T17:06:26Z https://community.graphisoft.com/t5/Libraries-objects/Zone-Stamp-wrong-measured-area/m-p/211464#M18969 Michael, yes on the update zones. I just now fixed the issue which is that there was a nearly unperceivable gap in the enclosing walls. When properly joined this issue went away. Thanks for you response. Scott Fri, 01 Oct 2010 17:17:22 GMT https://community.graphisoft.com/t5/Libraries-objects/Zone-Stamp-wrong-measured-area/m-p/211464#M18969 Scott Bulmer 2010-10-01T17:17:22Z