topic Re: Library Door with fixed part in Libraries & objects

Library Door with fixed part

Jose Gradoli — Mon, 10 Feb 2025 16:41:14 GMT

Hi,

First of all sorry if the question is not understandable, because I want to draw a door like the one attached in the post which has a "tarja" (fixed part in the upper side of the door), but there's nothing similar in the AC Library..

¿Is there any door or object similar to the one I want in the library?

Re: Library Door with fixed part

Rubia Torres — Thu, 29 Dec 2022 11:32:06 GMT

Hi Jose,

You can achieve the desired result by setting the object "Door with Transom". Please check the screenshots below (from Archicad 26). Hope they will help you 😉

Cheers,

Re: Library Door with fixed part

Jose Gradoli — Fri, 10 Feb 2023 10:59:03 GMT

Hi,

Thanks a lot for your answer. I'm still in AC25 waiting AC26 ARM SPA, but the door library object is the same in AC25 and 26.

The solution is 90 % suitable but it still appears a frame between the higher and lower part of the door.

I replied your instructions in AC25 and 26 and the frame is still there

In any case it's much more useful than the way I was drawing those doors.

Thanks again

Re: Library Door with fixed part

Mahmoud Qenawi — Fri, 10 Feb 2023 17:42:57 GMT

AS @Rubia Torres has said, only i add few things as a workaround to achieve your targeted door, by adjusting the working units to be (0,0000) 4 numbers tolerance then adjust Transom frame width in Frame style & Dimensions panel to be ( 0.0001 m in my case ) then you can retrieve your default working units it will appear as 0 value: