https://community.graphisoft.com/t5/Libraries-objects/Eliminating-Custom-Door-Panel-Outline/m-p/234719#M2316 I've found you can set the FRAME &amp; LEAF OUTLINE PENS in the DOOR SETTING &amp; OPENING - MODEL ATTRIBUTES TO all white (which covers and hides the sharing linework which should not be hidden), but one cannot choose TRANSPARENT. I also cannot find any way to alter the opening line. Fri, 21 Jun 2019 22:43:16 GMT Dave Jochum 2019-06-21T22:43:16Z https://community.graphisoft.com/t5/Libraries-objects/Eliminating-Custom-Door-Panel-Outline/m-p/234718#M2315 <DIV class="actalk-migrated-content"><T>Is it possible to eliminate the door panel outline that apparently is created by default with a custom door? I've created an arch-topped iron gate, so the rectangular outline is not appropriate. I also want the opening lines referencing the actual gate edges, not the outlining rectangle. (Ignore the door showing behind the gate.)</T></DIV> Wed, 24 May 2023 08:42:21 GMT https://community.graphisoft.com/t5/Libraries-objects/Eliminating-Custom-Door-Panel-Outline/m-p/234718#M2315 Dave Jochum 2023-05-24T08:42:21Z https://community.graphisoft.com/t5/Libraries-objects/Eliminating-Custom-Door-Panel-Outline/m-p/234719#M2316 I've found you can set the FRAME &amp; LEAF OUTLINE PENS in the DOOR SETTING &amp; OPENING - MODEL ATTRIBUTES TO all white (which covers and hides the sharing linework which should not be hidden), but one cannot choose TRANSPARENT. I also cannot find any way to alter the opening line. Fri, 21 Jun 2019 22:43:16 GMT https://community.graphisoft.com/t5/Libraries-objects/Eliminating-Custom-Door-Panel-Outline/m-p/234719#M2316 Dave Jochum 2019-06-21T22:43:16Z