topic Re: Doors and Windows are all empty openings, objects not sh in Libraries & objects

Doors and Windows are all empty openings, objects not shown.

Anonymous — Wed, 24 May 2023 10:40:14 GMT

Archicad 12, All my doors and windows went from having parameters to just empty openings. Also my objects are shown as just dots. Libraries have been reloaded etc. Also, it takes a long time for the project to boot.

Re: Doors and Windows are all empty openings, objects not sh

Anonymous — Tue, 18 Aug 2009 22:50:55 GMT

Hi,

It sounds like it is still a library problem. Go into the library manager and check the paths are correct. If necessary remove the previously loaded folders, and re add them from the correct locations. A screenshot of the library manager may be useful to us too.

Is there anything being reported on the library loading report? (Go to 'Window'>'Palettes'>'Library Loading Report' to open)

Re: Doors and Windows are all empty openings, objects not sh

Anonymous — Tue, 18 Aug 2009 23:02:56 GMT

Hi,
Remove all the library and Add what you need again.
Your file lose the library. That why it shows dots at door/Window

Cheers