topic Re: Creating Custom GDL Windows in Libraries & objects

Creating Custom GDL Windows

Anonymous — Wed, 24 May 2023 10:40:43 GMT

Does anyone know how to create and save a custom GDL window. I have already created the window and saved it as a .gsm and as a window. The problem i have is when i place the window in a wall, the window comes in horizontal instead of vertical like all other windows. Does this have anything to do with the position the assembly is in when i initially save it as a .gsm file?

Re: Creating Custom GDL Windows

Anonymous — Fri, 20 Mar 2009 16:32:55 GMT

Indeed, you'll need to position your camera in Axonometry View to get a top view of your assembly, then save as... Have a look at Interactive Training Modules > Building Objects Creation : http://www.graphisoft.com/products/archicad/training_guides/

Good luck

Re: Creating Custom GDL Windows

Anonymous — Fri, 20 Mar 2009 16:37:03 GMT

Or AC 12 Reference Guide pages 321-322

Re: Creating Custom GDL Windows

Anonymous — Fri, 20 Mar 2009 16:38:16 GMT

thanks for the response. Yeah, i did go into the parallel projections settings dialog, and clicked on the top view camera position, then did the save. I also did the elevation view, still the same result though.

Re: Creating Custom GDL Windows

Erika Epstein — Fri, 20 Mar 2009 16:54:31 GMT

When you save it from the 3D window as a library part, are you choosing the WINDOW as the type of object?

Re: Creating Custom GDL Windows

Anonymous — Fri, 20 Mar 2009 16:55:45 GMT

In fact, you don't need the 'top view camera position' icon... Try Side View and turn the camera above : open the 3D window again and you should see the top projection of your assembly . Then save as...

Re: Creating Custom GDL Windows

Anonymous — Fri, 20 Mar 2009 17:15:51 GMT

yeah, i am saving it as a window. I also did try the 'side view' in the projections settings, not sure what you mean by 'turn the camera above : open the 3D window again and you should see the top projection of your assembly'. Do you just mean to rotate the view in the 3d window by using orbit to get a plan view of the assembly again?

thanks

Re: Creating Custom GDL Windows

Erika Epstein — Fri, 20 Mar 2009 17:27:20 GMT

Try this

Re: Creating Custom GDL Windows

Anonymous — Fri, 20 Mar 2009 17:46:20 GMT

I just tried that method, still same result, comes in sideways. I don't think you can rotate the window once its in the wall, to make it upright, or can you?
Here is a look at what is happening.

Re: Creating Custom GDL Windows

Erika Epstein — Fri, 20 Mar 2009 17:56:11 GMT

K,
Start over.
follow the trainging guide
custom window creation

Add your OS and Archicad version to your signature.

Re: Creating Custom GDL Windows

Anonymous — Fri, 20 Mar 2009 18:00:30 GMT

will do, thanks for the help.