topic Re: Attribute defs IND(material,"") query in Libraries & objects

Attribute defs IND(material,"") query

Anonymous — Fri, 17 Oct 2008 02:27:29 GMT

Howdy
Can anyone point me in the right direction for info on defining a material that I can call up using the 'ind' thingy, but is actually a parametric material selection? Or is that tail chasing?

I need to define material MYCOLOUR which would be called from the parameters selection OR be able to remove the ind(material.. from groups and replace it without causing it to nuke the last 3 lines of coordinates.

Thanks in advance

Re: Attribute defs IND(material,"") query

Laszlo Nagy — Fri, 17 Oct 2008 12:43:01 GMT

I do not fully understand what you are trying to do but from what I understand I believe this cannot be done with GDL.
If you explain it further (maybe with illustrations) then I might say with some more conviction that it is not possible.

Re: Attribute defs IND(material,"") query

Anonymous — Sun, 19 Oct 2008 01:16:57 GMT

See if this post helps you.

Similar Problem Solved

Re: Attribute defs IND(material,"") query

Anonymous — Tue, 21 Oct 2008 22:17:30 GMT

Excellent, removing the ind(material...) does it - less is more! Cheers

Re: Attribute defs IND(material,"") query

Laszlo Nagy — Wed, 22 Oct 2008 13:13:04 GMT

Can you post the solution?
I am curious of how it worked out.

Re: Attribute defs IND(material,"") query

Anonymous — Fri, 24 Oct 2008 02:54:23 GMT

I had made a collection of bits that were created and given an indexed material value that I wanted to control parametrically, basically as per the post from Wrathchild the entire ind(material...) chains could be replaced by the parameter name - the point I missed when first trying this was the need to get all of them for each element.

Before
sprism_{2} "Paint-01","Paint-01","Paint-01",
57, 0, 0, 1, 0, -1.495322479477, 0,
0, 0, 1, 0, 0, 0,
-0.6325, 1.103805482683E-16, 79, ind(material,"Paint-01"),
-0.6285229727575, -0.07081753113534, 79, ind(material,"Paint-01"),
-0.616641904455, -0.1407444907274, 79, ind(material,"Paint-01"),
-0.59700620642, -0.2089015066866, 79, ind(material,"Paint-01"),
-0.5698628089483, -0.2744314649919, 79, ind(material,"Paint-01"),

After
sprism_{2} AC_SPK_MAT, AC_SPK_MAT, AC_SPK_MAT,
57, 0, 0, 1, 0, -1.495322479477, 0,
0, 0, 1, 0, 0, 0,
-0.6325, 1.103805482683E-16, 79, AC_SPK_MAT,
-0.6285229727575, -0.07081753113534, 79, AC_SPK_MAT,
-0.616641904455, -0.1407444907274, 79, AC_SPK_MAT,
-0.59700620642, -0.2089015066866, 79, AC_SPK_MAT,
-0.5698628089483, -0.2744314649919, 79, AC_SPK_MAT,

Probably really obvious now DOH!

Re: Attribute defs IND(material,"") query

Anonymous — Fri, 24 Oct 2008 04:47:57 GMT

Nothing like coding to make you feel stupid....lol

Re: Attribute defs IND(material,"") query

Laszlo Nagy — Fri, 24 Oct 2008 07:43:26 GMT

OK, I see.
So you skipped using the IND() part entirely.