https://community.graphisoft.com/t5/Libraries-objects/Triangular-door-frame/m-p/21521#M28945 Show the drawing (2D). Sat, 02 Feb 2008 17:35:03 GMT Anonymous 2008-02-02T17:35:03Z https://community.graphisoft.com/t5/Libraries-objects/Triangular-door-frame/m-p/21520#M28944 <DIV class="actalk-migrated-content"><T>Does anybody have any sugestions on how to create a door frame, which will match a custom door panel, with a triangular shaped top?</T></DIV> Wed, 24 May 2023 09:00:33 GMT https://community.graphisoft.com/t5/Libraries-objects/Triangular-door-frame/m-p/21520#M28944 Anonymous 2023-05-24T09:00:33Z https://community.graphisoft.com/t5/Libraries-objects/Triangular-door-frame/m-p/21521#M28945 Show the drawing (2D). Sat, 02 Feb 2008 17:35:03 GMT https://community.graphisoft.com/t5/Libraries-objects/Triangular-door-frame/m-p/21521#M28945 Anonymous 2008-02-02T17:35:03Z https://community.graphisoft.com/t5/Libraries-objects/Triangular-door-frame/m-p/21522#M28946 Make the whole unit as a custom door. The typical method is to model as slabs and save as a library part from the 3D window (see GDL Reference in your help menu). You will have to edit the symbol since the automatic one is no good. Also, since the unit is non-rectangular, you will also need to include a slab in your model with the ID of "WALLHOLE" to define the wall opening. Sat, 02 Feb 2008 18:35:04 GMT https://community.graphisoft.com/t5/Libraries-objects/Triangular-door-frame/m-p/21522#M28946 Anonymous 2008-02-02T18:35:04Z