https://community.graphisoft.com/t5/Libraries-objects/turned-down-slab/m-p/72116#M29532 dingel:<BR /> <BR /> You don't mention which version of ArchiCAD you are using, but if you are using version 10 or 11 you can create the profile of the turn down slab you want with the Profile Manager, set it to be used with either the Wall or Beam Tool, and draw the edge where needed as a wall or beam. If the Section fill of the concrete slab and edge beam match, then they will automatically clean up in section.<BR /> <BR /> HTH<BR /> <BR /> David Wed, 31 Oct 2007 12:36:19 GMT David Maudlin 2007-10-31T12:36:19Z https://community.graphisoft.com/t5/Libraries-objects/turned-down-slab/m-p/72115#M29531 <DIV class="actalk-migrated-content"><T>I very new to this so I apologize for a potentially ignorant question, but where could I find a object for a meldable trapazoid or a turn down slab edge with a vertical ext. face?<BR /> <BR /> I'm guessing that this is one that is likely very easy to create on your own. I've never tried it.<BR /> <BR /> Thank you,<BR /> <BR /> KJ</T></DIV> Wed, 31 Oct 2007 05:50:48 GMT https://community.graphisoft.com/t5/Libraries-objects/turned-down-slab/m-p/72115#M29531 Anonymous 2007-10-31T05:50:48Z https://community.graphisoft.com/t5/Libraries-objects/turned-down-slab/m-p/72116#M29532 dingel:<BR /> <BR /> You don't mention which version of ArchiCAD you are using, but if you are using version 10 or 11 you can create the profile of the turn down slab you want with the Profile Manager, set it to be used with either the Wall or Beam Tool, and draw the edge where needed as a wall or beam. If the Section fill of the concrete slab and edge beam match, then they will automatically clean up in section.<BR /> <BR /> HTH<BR /> <BR /> David Wed, 31 Oct 2007 12:36:19 GMT https://community.graphisoft.com/t5/Libraries-objects/turned-down-slab/m-p/72116#M29532 David Maudlin 2007-10-31T12:36:19Z