https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241958#M31 It seems the cabinet is using the material rotated from its intended direction.<BR /> I am not familiar with that object so do not know if there is an option to rotate the material or maybe it is a custom door panel.<BR /> <BR /> If you can't control it in the object, then you could duplicate that material and rotate the fill.<BR /> Then use the duplicate material in the cabinet.<BR /> <BR /> Barry. Fri, 05 Feb 2021 02:26:16 GMT Barry Kelly 2021-02-05T02:26:16Z https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241957#M30 <DIV class="actalk-migrated-content"><T>How to control the fill on furniture door in elevation view. I use object - Kitchen Cabinets 24. The fill on doors appears turned at 90°. How can I control fill direction?</T></DIV> Wed, 24 May 2023 10:56:11 GMT https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241957#M30 Anonymous 2023-05-24T10:56:11Z https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241958#M31 It seems the cabinet is using the material rotated from its intended direction.<BR /> I am not familiar with that object so do not know if there is an option to rotate the material or maybe it is a custom door panel.<BR /> <BR /> If you can't control it in the object, then you could duplicate that material and rotate the fill.<BR /> Then use the duplicate material in the cabinet.<BR /> <BR /> Barry. Fri, 05 Feb 2021 02:26:16 GMT https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241958#M31 Barry Kelly 2021-02-05T02:26:16Z https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241959#M32 I have been test this situation on different object. The situation on different object is different. Then is necessary to have two the same fill rotated at 90°. Fri, 05 Feb 2021 08:31:40 GMT https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241959#M32 Anonymous 2021-02-05T08:31:40Z https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241960#M33 <BLOCKQUOTE>sigitas wrote:<BR /> I have been test this situation on different object. The situation on different object is different. Then is necessary to have two the same fill rotated at 90°. </BLOCKQUOTE> The quickest solution would be so.<BR /> <BR /> But seems like there´s an inconsistency in Texture mapping, hope they'll fix that. They shouldn't be rotated. Fri, 05 Feb 2021 13:36:53 GMT https://community.graphisoft.com/t5/Libraries-objects/How-to-control-the-Furniture-door-fill-in-elevation/m-p/241960#M33 vdentello 2021-02-05T13:36:53Z