topic Re: drawing title error in Libraries & objects

drawing title error

Anonymous — Mon, 22 Jan 2007 21:06:40 GMT

hi all, i'm trying to make a custom title type for drawings in the layout mode and they're coming in strange - out of scale in the Y direction.

any help would be appreciated. see attachment for more info.
thanks

Re: drawing title error

Anonymous — Mon, 22 Jan 2007 21:12:41 GMT

I had a similar problem a while back that was fixed by simply selecting "no title" and ok-ing, then return to settings and select your title again. It seemed to reset to the way it should be.

HTH

Re: drawing title error

Anonymous — Mon, 22 Jan 2007 22:33:51 GMT

problem solved. thanks again!

Re: drawing title error

Srinivas — Thu, 08 Feb 2007 15:08:58 GMT

s2art wrote:
I had a similar problem a while back that was fixed by simply selecting "no title" and ok-ing, then return to settings and select your title again. It seemed to reset to the way it should be.

HTH

Thanks, I've gone mad with this problem today, you saved me.......

Thank you again!!!!!

Re: drawing title error

Anonymous — Wed, 28 Feb 2007 14:45:05 GMT

[I had a similar problem a while back that was fixed by simply selecting "no title" and ok-ing, then return to settings and select your title again. It seemed to reset to the way it should be.

HTH]

This helped me to get the title type to look correct. Thanks! However I can't figure out how to manually locate it.

Re: drawing title error

Anonymous — Wed, 28 Feb 2007 19:36:37 GMT

Drag the title and select the "move sub-element" option in the pet pallete.

Re: drawing title error

Anonymous — Thu, 01 Mar 2007 00:01:35 GMT

I was able to get the sub element to respond a few times. But it was inconsistent in the different layouts. Usually it will only allow me to move the plan inside the drawings frame. The frame itself and the title in question stay in the same place.

Re: drawing title error

Anonymous — Thu, 01 Mar 2007 00:43:23 GMT

You must pick on a node of the title to move it.

Re: drawing title error

Anonymous — Sun, 04 Mar 2007 21:17:16 GMT

It is best, if you can find (or code) an appropriate one, to switch to a new parametric drawing title rather than using one converted from a PlotMaker drawing.