https://community.graphisoft.com/t5/Libraries-objects/Lift-Slide-Corner-Door/m-p/261596#M3289 <DIV class="actalk-migrated-content"><T>Has anyone found an acceptable way of modeling a corner door as shown below? I have searched quite deeply and found very little. <BR /> <BR /> Around 10 years ago there was talk on here of a corner door being available from the new dead Depository.<BR /> <BR /> These are becoming more and more popular for our firm and to date, we do not have an effective way of modeling something like this.</T></DIV> Wed, 24 May 2023 08:43:14 GMT Anonymous 2023-05-24T08:43:14Z https://community.graphisoft.com/t5/Libraries-objects/Lift-Slide-Corner-Door/m-p/261596#M3289 <DIV class="actalk-migrated-content"><T>Has anyone found an acceptable way of modeling a corner door as shown below? I have searched quite deeply and found very little. <BR /> <BR /> Around 10 years ago there was talk on here of a corner door being available from the new dead Depository.<BR /> <BR /> These are becoming more and more popular for our firm and to date, we do not have an effective way of modeling something like this.</T></DIV> Wed, 24 May 2023 08:43:14 GMT https://community.graphisoft.com/t5/Libraries-objects/Lift-Slide-Corner-Door/m-p/261596#M3289 Anonymous 2023-05-24T08:43:14Z https://community.graphisoft.com/t5/Libraries-objects/Lift-Slide-Corner-Door/m-p/261597#M3290 You can basically create this with the CadImage D&amp;W tool. See attached.<BR /> <BR /> Cheers, Thu, 15 Nov 2018 04:57:59 GMT https://community.graphisoft.com/t5/Libraries-objects/Lift-Slide-Corner-Door/m-p/261597#M3290 Gerald Hoffman 2018-11-15T04:57:59Z