https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108687#M33168 That depends on your definition of easy. If you have a lot of GDL experience, it's not that hard. If you don't, it's not what I would recommend for a first project. Wed, 11 Oct 2006 15:45:56 GMT TomWaltz 2006-10-11T15:45:56Z https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108686#M33167 <DIV class="actalk-migrated-content"><T>Hi<BR /> <BR /> All I want to create is a 35mm tube with a few bends in...it'd be nice to be able to generate this rather than hand code...<BR /> <BR /> is there an easy way?<BR /> <BR /> TIA<BR /> <BR /> Adri</T></DIV> Wed, 11 Oct 2006 15:22:44 GMT https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108686#M33167 Anonymous 2006-10-11T15:22:44Z https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108687#M33168 That depends on your definition of easy. If you have a lot of GDL experience, it's not that hard. If you don't, it's not what I would recommend for a first project. Wed, 11 Oct 2006 15:45:56 GMT https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108687#M33168 TomWaltz 2006-10-11T15:45:56Z https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108688#M33169 Based on your description of what you want to make,<BR /> I would suggest either Profiler or TrussMaker.<BR /> Peter Devlin Wed, 11 Oct 2006 18:27:26 GMT https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108688#M33169 Anonymous 2006-10-11T18:27:26Z https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108689#M33170 Archiforma should do it in a snap. Wed, 11 Oct 2006 20:44:18 GMT https://community.graphisoft.com/t5/Libraries-objects/Easy-GDL-Generation/m-p/108689#M33170 Anonymous 2006-10-11T20:44:18Z