topic Re: Sill to wall base height discrepancy in Libraries & objects

Sill to wall base height discrepancy

Anonymous — Wed, 24 May 2023 09:33:54 GMT

Hi,

I'm experiencing a discrepancy in a project I'm working on:
Sill to wall base height is set to 900 mm. In my plan, however, the window label says 599 mm. Can anyone explain this, and what to do about it?

See attached screen shot.

I appreciate any help.

Truls

Re: Sill to wall base height discrepancy

Daniel Kovacs — Wed, 22 Aug 2018 12:13:10 GMT

Hi,

I think this could go sideways at several places:
- Make sure that the marker is set to measure the height from the wall base, and not the story or the Anchor
- There's a Sub-floor thickness value under the "Dimension Marker" tab, that is usually 100 mm by default. This value is subtracted from the measured value, so make sure this is set to 0.

Other than that, it should be fine.

Regards,

Re: Sill to wall base height discrepancy

Anonymous — Wed, 06 Feb 2019 14:09:06 GMT

Thanks so much for your answer, dkovacs!

(I thought I was automatically emailed when a reply was posted, so I eventually found a usable solution myself, and did not check in here until now:)

Regards,
Truls

Re: Sill to wall base height discrepancy

Lingwisyer — Thu, 07 Feb 2019 01:17:08 GMT

Truls wrote:
(I thought I was automatically emailed when a reply was posted, so I eventually found a usable solution myself, and did not check in here until now:)

Check your notification settings in the user control panel.

Ling.