https://community.graphisoft.com/t5/Libraries-objects/use-cabinet-builder-to-build-curve-cabinet/m-p/108049#M35486 CabinetBuilder will not build a carcass with the curved shape - just the fronts. The rationale was that the carcasses under the curved counter would be rectangular and therefore encased in a framed finished enclosure. If this is the way you see your millwork piece buillt, then configure the carcasses with the carcass objject and use the other bits to build the front(s). Wed, 11 Apr 2007 04:13:34 GMT Aaron Bourgoin 2007-04-11T04:13:34Z https://community.graphisoft.com/t5/Libraries-objects/use-cabinet-builder-to-build-curve-cabinet/m-p/108047#M35484 <DIV class="actalk-migrated-content"><T>I tried to use cabinet builder to build a cabinet as picture showing below. It looks like I only can use cabinet builder to build curve door. Is anyone know to build entire cabinet as one object? Or I should build cabinet separate with curve door and group them together?<BR /> <BR /> Thank you!</T></DIV><BR /><IMG src="http://community.graphisoft.com/t5/image/serverpage/image-id/73621iCFDDEF6E89A556F8/image-size/large?v=v2&amp;px=999" border="0" alt="Picture 1.png" title="Picture 1.png" /> Wed, 24 May 2023 10:57:37 GMT https://community.graphisoft.com/t5/Libraries-objects/use-cabinet-builder-to-build-curve-cabinet/m-p/108047#M35484 Anonymous 2023-05-24T10:57:37Z https://community.graphisoft.com/t5/Libraries-objects/use-cabinet-builder-to-build-curve-cabinet/m-p/108048#M35485 Yes, i want to know how to build kitchen cabinet in curve with archicadd 10 as well, can anyone help .PLz~~~ Wed, 11 Apr 2007 00:55:36 GMT https://community.graphisoft.com/t5/Libraries-objects/use-cabinet-builder-to-build-curve-cabinet/m-p/108048#M35485 Anonymous 2007-04-11T00:55:36Z https://community.graphisoft.com/t5/Libraries-objects/use-cabinet-builder-to-build-curve-cabinet/m-p/108049#M35486 CabinetBuilder will not build a carcass with the curved shape - just the fronts. The rationale was that the carcasses under the curved counter would be rectangular and therefore encased in a framed finished enclosure. If this is the way you see your millwork piece buillt, then configure the carcasses with the carcass objject and use the other bits to build the front(s). Wed, 11 Apr 2007 04:13:34 GMT https://community.graphisoft.com/t5/Libraries-objects/use-cabinet-builder-to-build-curve-cabinet/m-p/108049#M35486 Aaron Bourgoin 2007-04-11T04:13:34Z