topic Re: D1 Storefront missing frame in Libraries & objects

D1 Storefront missing frame

Anonymous — Wed, 24 May 2023 08:37:14 GMT

Can someone verify that when setting the transom height of the D1 Storefront 3 door to 0 that the perimeter frame disappears? The only way to workaround this that I've found is to set the transom to a small value. Not great, but it will get the job done until a fix is posted.

Re: D1 Storefront missing frame

Djordje — Mon, 11 Oct 2004 19:21:18 GMT

Millard wrote:
Can someone verify that when setting the transom height of the D1 Storefront 3 door to 0 that the perimeter frame disappears? The only way to workaround this that I've found is to set the transom to a small value. Not great, but it will get the job done until a fix is posted.

Take a look at http://archicad-talk.graphisoft.com/viewtopic.php?p=23045#23045

Re: D1 Storefront missing frame

Anonymous — Mon, 11 Oct 2004 20:00:57 GMT

Sounds like a similar problem, but with a different library part. The problem is if I turn off the transom by setting the height to zero the entire sidelight frame disappears

Re: D1 Storefront missing frame

Anonymous — Wed, 04 Jun 2008 20:44:00 GMT

Yes, I can verify that this happens with D1 Storefront 3. In addition to the frame being gone, the transom is wider then the door and I can't remove a center horizontal mullion in the transom without the transom glass disappearing in addition to its frame.

For what its worth, I note on your jpg that we are both using this library part with one sidelight only.

Re: D1 Storefront missing frame

Anonymous — Wed, 04 Jun 2008 20:52:53 GMT

I haven't posted in years, am now using ArchiCAD 9 on Mac OSX. Disregard my previous signature