topic Re: is there an object like this? in Libraries & objects

is there an object like this?

Mats_Knutsson — Wed, 24 May 2023 09:34:53 GMT

Hi,
Looking for a window with horisontal post between clear glass and blind. I can't find any other way to this rather than a custom window panel for the blind and a piece of wall behind the blind. If all of this exists somewhere in one object I'm interested to know
Cheers,
Mats

Re: is there an object like this?

Aaron Bourgoin — Mon, 04 Dec 2017 12:28:03 GMT

I'd start with the vertical Multi-Sash Window and go from there. You may be able to adjust Sash 1 (bottom sash) to get you there or most of the way there.

Re: is there an object like this?

Mats_Knutsson — Mon, 04 Dec 2017 15:42:09 GMT

Aaron wrote:
I'd start with the vertical Multi-Sash Window and go from there. You may be able to adjust Sash 1 (bottom sash) to get you there or most of the way there.

I tried som different ones and figure it's easiest with a regular window and custom panel at the bottom. However the wall part behind the blind hs to be a separate wall I guess.

Re: is there an object like this?

Barry Kelly — Tue, 05 Dec 2017 00:54:57 GMT

Any window you place will cut a hole through the entire wall.
Unless you want to get into the script and start playing around with the WALLNICHE command (rather than WALLHOLE) as this will allow you to set the depth of the cut.

The easiest way if you are not happy playing with the GDL is to add a separate bit of wall back in.

Barry.

Re: is there an object like this?

Erwin Edel — Tue, 05 Dec 2017 09:32:00 GMT

You might be able to get close by setting up a custom jamb on the inside.