https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230483#M47210 As Steve has shown it is controlled in the MVO settings.<BR /> You then need to 'Store As' a combination with the markers on and another with the markers off.<BR /> Then in your view settings for the electrical plan ensure the MVO combination for no markers is set.<BR /> The other MVO combination can be used for your other plan views.<BR /> <BR /> Barry. Wed, 20 Sep 2017 01:05:11 GMT Barry Kelly 2017-09-20T01:05:11Z https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230481#M47208 <DIV class="actalk-migrated-content"><T>Hi all, is there a way to turn off window and door marks on, say, an electrical plan where those marks are not needed?</T></DIV> Fri, 26 May 2023 09:12:59 GMT https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230481#M47208 Anonymous 2023-05-26T09:12:59Z https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230482#M47209 . Tue, 19 Sep 2017 20:05:35 GMT https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230482#M47209 Steve Jepson 2017-09-19T20:05:35Z https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230483#M47210 As Steve has shown it is controlled in the MVO settings.<BR /> You then need to 'Store As' a combination with the markers on and another with the markers off.<BR /> Then in your view settings for the electrical plan ensure the MVO combination for no markers is set.<BR /> The other MVO combination can be used for your other plan views.<BR /> <BR /> Barry. Wed, 20 Sep 2017 01:05:11 GMT https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230483#M47210 Barry Kelly 2017-09-20T01:05:11Z https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230484#M47211 Thank you very much for the reply. I'll try to make this work for my project. Thu, 21 Sep 2017 01:19:07 GMT https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230484#M47211 Anonymous 2017-09-21T01:19:07Z https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230485#M47212 The model view option 'option' is huge. After experimenting with that, I've created several 'option' views for different scenarios. Thanks Steve and Barry for pointing the way. Thu, 21 Sep 2017 13:58:06 GMT https://community.graphisoft.com/t5/Libraries-objects/Window-and-Door-marks-on-electrical-plan/m-p/230485#M47212 Anonymous 2017-09-21T13:58:06Z