topic Re: more error messages creating 3d views in Libraries & objects

errors when creating 3d views

Dave Brach — Mon, 15 Jan 2018 01:44:04 GMT

I am getting the following error message when trying to create 3d view. what to do?

more error messages creating 3d views

Dave Brach — Mon, 15 Jan 2018 01:46:37 GMT

this is another error message about a pen number, probably pen 0. Do I need to find the casement window and delete it?

Re: errors when creating 3d views

Barry Kelly — Mon, 15 Jan 2018 02:18:41 GMT

In your stair settings (riser section) you will need to assign a building material for the risers.

This is a problem with the stair and railing library parts if you are not using a standard Graphisoft template.
All building materials, line types, pens, fills (i.e. all attributes) as set by default in the object scripts may not match those that you have in your job/template.

There are only 2 ways to fix this.

One is to edit all of the object scripts and reset all of the parameter defaults.
You will need to do this every time an new library (or update) is released.

The other is to set up a bunch of favourites with all the settings changed as you want them.

Barry.

Re: more error messages creating 3d views

Barry Kelly — Mon, 15 Jan 2018 02:22:07 GMT

Just find the placed window object and check all the pen settings in the parameters.
If all the pens are set correctly then it could be an actual error in the object script.

Barry.

Re: errors when creating 3d views

DGSketcher — Mon, 15 Jan 2018 10:47:45 GMT

The riser issue is straight forward - the assigned material is missing from the library.

The pen allocation is more interesting and I noticed it in a recent object I created. Unless trapped in the GDL parameter script, it is possible to use the background pens with values 0 and -1, (window background & transparent) as a foreground fill pen which causes the error you refer to in the window. Check your pens for the window to make sure you have assigned a pen other than the background pens for any foreground fill pen.

Re: errors when creating 3d views

runxel — Mon, 15 Jan 2018 13:07:40 GMT

DGSketcher wrote:
Unless trapped in the GDL parameter script, it is possible to use the background pens with values 0 and -1, (window background & transparent) as a foreground fill pen which causes the error you refer to in the window.

To "trap" this you can use this code in the parameter script:

IF mypen < 1 THEN mypen = 1
PARAMETERS mypen = mypen

Re: errors when creating 3d views

Dave Brach — Mon, 15 Jan 2018 19:27:39 GMT

thanks for the responses. I guess my question is: why does archicad give me these error messages at all? I don't care about pen numbers or missing materials that don't affect my work, but my 3D views are constantly crashing and giving me these long reports that just slow me down.

I just got new message today in yet a different project .pln (attached here). Seems like this is happening more often than before and reflects a software flaw.....

Re: errors when creating 3d views

Bruce — Tue, 16 Jan 2018 00:23:12 GMT

ARCHICAD gives you these error messages because that’s what they are - errors. If you want to turn these off you can do so under your work environment settings

Re: errors when creating 3d views

Barry Kelly — Tue, 16 Jan 2018 03:07:16 GMT

Dave wrote:
I just got new message today in yet a different project .pln (attached here). Seems like this is happening more often than before and reflects a software flaw.....

This is a similar issue as the riser material.
In your stair there is an end plate used on a beam (stringer?) that has not got a valid material assigned to it.

Not so much a flaw in the software - just that you are not using the same materials in you file that the stair objects were set up for.

You can turn these error messages of in the Work Environment as mentioned, but be aware you may then miss out on more important messages.

Barry.