topic Re: Door in Complex Profile Wall in Libraries & objects

Door in Complex Profile Wall

Bob Moore — Fri, 26 May 2023 09:32:00 GMT

I'm new to using complex profiles and in this case I'm using a complex profile for the wall with a storefront door but the door is displayed a closed in 2D although my setting are set to 90 degrees. Does complex profiles affect the display?

Re: Door in Complex Profile Wall

Erika Epstein — Wed, 12 Mar 2008 05:43:29 GMT

try placing the same door in a non-complex profile and see if you still have the same problem.

Re: Door in Complex Profile Wall

David Maudlin — Wed, 12 Mar 2008 12:27:26 GMT

Bob:

Check the door display option in the door dialog box: Floor Plan and Section > Floor Plan Display: and set it to Symbolic. Some of the other settings are actually a 3D cut through the door using the Floor Plan Cut.

HTH

David

Re: Door in Complex Profile Wall

Bob Moore — Wed, 12 Mar 2008 12:46:08 GMT

Thanks Dave, that fixed it. I had never used that door before.

Re: Door in Complex Profile Wall

Bob Moore — Wed, 12 Mar 2008 12:46:46 GMT

Thanks Dave, that fixed it. I had never used that door before.

Re: Door in Complex Profile Wall

Laszlo Nagy — Wed, 12 Mar 2008 13:32:03 GMT

Wow, you must be really thankful.
You thanked it three times.
(Just joking)

Re: Door in Complex Profile Wall

Laszlo Nagy — Wed, 12 Mar 2008 13:34:54 GMT

No, actually, there is something going on with the site.
It gave me debug error messages and posted it twice.