https://community.graphisoft.com/t5/Libraries-objects/Door-amp-window-markers/m-p/7574#M50427 <DIV class="actalk-migrated-content"><T>I have inserted as a module a floor plan into another AC drawing that is the site plan. I cannot turn off the door and window markers; the doors and windows are not on a separate layer and neither are the markers. The only way I can turn them off is by turning off the interior and exterior walls. That sort of defeats the purpose of the module on the site plan.<BR /> <BR /> I don't want to have the site plan and the building on the same drawing because when I rotate the whole .pln with the site to fit on a sheet to plot, all the notes are reading in the wrong direction. That would mean I would have to insert all the notes on the wrong angle to read it right on the plotted sheet. <BR /> <BR /> I'm digging myself a deep hole here.</T></DIV> Fri, 26 May 2023 09:48:11 GMT Tom Krowka 2023-05-26T09:48:11Z https://community.graphisoft.com/t5/Libraries-objects/Door-amp-window-markers/m-p/7574#M50427 <DIV class="actalk-migrated-content"><T>I have inserted as a module a floor plan into another AC drawing that is the site plan. I cannot turn off the door and window markers; the doors and windows are not on a separate layer and neither are the markers. The only way I can turn them off is by turning off the interior and exterior walls. That sort of defeats the purpose of the module on the site plan.<BR /> <BR /> I don't want to have the site plan and the building on the same drawing because when I rotate the whole .pln with the site to fit on a sheet to plot, all the notes are reading in the wrong direction. That would mean I would have to insert all the notes on the wrong angle to read it right on the plotted sheet. <BR /> <BR /> I'm digging myself a deep hole here.</T></DIV> Fri, 26 May 2023 09:48:11 GMT https://community.graphisoft.com/t5/Libraries-objects/Door-amp-window-markers/m-p/7574#M50427 Tom Krowka 2023-05-26T09:48:11Z https://community.graphisoft.com/t5/Libraries-objects/Door-amp-window-markers/m-p/7575#M50428 Tom,<BR /> Try under the display options - Show on plan, not Show with Dims (which I believe may be your culprit). Hope this helps.<BR /> <BR /> Tom Thu, 12 Feb 2004 21:00:49 GMT https://community.graphisoft.com/t5/Libraries-objects/Door-amp-window-markers/m-p/7575#M50428 Anonymous 2004-02-12T21:00:49Z https://community.graphisoft.com/t5/Libraries-objects/Door-amp-window-markers/m-p/7576#M50429 That's the ticket.<BR /> <BR /> Thanks Thu, 12 Feb 2004 21:08:59 GMT https://community.graphisoft.com/t5/Libraries-objects/Door-amp-window-markers/m-p/7576#M50429 Tom Krowka 2004-02-12T21:08:59Z