topic Re: Fit In Window command in Libraries & objects

Fit In Window command

Bling Keeta — Fri, 26 May 2023 12:15:00 GMT

My Fit In Window command all of a sudden zooms out my window to
0.000000%. No matter how I try to tweet it, it goes to 0%. I have to use Zoom to Home to adjust my zoom. All other AC functions work with no problem.
Is there anything I can do to set this back?

Re: Fit In Window command

Bruce — Wed, 30 Aug 2017 01:13:12 GMT

Does it do this on every file, or just a specific file / storey?

Re: Fit In Window command

Bling Keeta — Wed, 30 Aug 2017 17:42:51 GMT

Bruce, it only happens with this particular file.
Other files working normally.
Thanks.

Re: Fit In Window command

Bruce — Wed, 30 Aug 2017 18:51:49 GMT

Then I would say what most likely has happened, is there is an element widely scattered from the rest of your model. If, at full extent, you do a select all, you may notice two different groups of hotspots. This should enable you to identify which element/s have gone rogue...

Re: Fit In Window command

Bling Keeta — Wed, 30 Aug 2017 21:53:46 GMT

I suspect this is the problem too. But Select All does not show anything.
By the way , Elevation and Section windows work fine.

Re: Fit In Window command

Bling Keeta — Wed, 30 Aug 2017 22:22:27 GMT

I finally found that little dot far away from the building. Problem solved. Thanks.