topic Re: object saving problem in embedded library in Libraries & objects

object saving problem in embedded library

ashwanikumarshukla — Wed, 24 May 2023 11:01:02 GMT

I am unable to save cabinet door as an object. after save error message is coming. Please see attached image. and i can't find that object in library. please help for solution.

Will anyone help me creation of kitchen cabinet as an object? Suggestion will be appreciated.

Re: object saving problem in embedded library

Erwin Edel — Fri, 27 Oct 2017 12:17:39 GMT

That is not an error message, just an information prompt telling you the object was saved in embedded library.

These are custom panels you can use for some of the kitchen library parts. You will have to choose custom panel and you should see a list of the ones you've saved to embedded library there.

If you've modelled the entire kitchen part as object, you should just save it as an object, not a kitchen cabinet door.

Re: object saving problem in embedded library

ashwanikumarshukla — Fri, 27 Oct 2017 12:59:52 GMT

Erwin wrote:
That is not an error message, just an information prompt telling you the object was saved in embedded library.

These are custom panels you can use for some of the kitchen library parts. You will have to choose custom panel and you should see a list of the ones you've saved to embedded library there.

If you've modelled the entire kitchen part as object, you should just save it as an object, not a kitchen cabinet door.

No, before save as an object for cabinet, i am trying to put cabinet door in plan. But can't succeed. Would you help me in creation of cabinet door? Bcoz after saving as cabinet door, i can't found the in Embedded library. That folder is showing blank.

Re: object saving problem in embedded library

Erwin Edel — Fri, 27 Oct 2017 13:08:25 GMT

This is where they show up. They are not objects you place in floor plan.

Excuse the Dutch, but I do not have INT library to show English, still the pictures used by UI should be the same.

Re: object saving problem in embedded library

Roopa A — Tue, 09 Jun 2020 10:20:22 GMT

I created object using morph and object which is downloaded from archibase. And I am trying to save the file,
it is saving. But when I open it in other file its not coming. only 2D symbol is there.

In is showing as Invalid 3D symbol, Open the library part for editing and check its 3D script for errors.

I checked in this also.. I'm not getting were is the problem.
What is the issue??

Thank you,

Roopa A

Re: object saving problem in embedded library

Lingwisyer — Wed, 10 Jun 2020 01:08:57 GMT

Roopa wrote:
created object using morph and object which is downloaded from archibase

Not sure how that workflow works, but might it be saving the ArchiBase object as a Call within your end object? If that is the case, you will also need to load that object into your other project.

Ling.

Re: object saving problem in embedded library

Roopa A — Wed, 10 Jun 2020 07:12:01 GMT

Its working.

Last time I tried saving it from 3d view as top view. and when I open it in other AC file., it showed Invalid 3D symbol, Open the library part for editing and check its 3D script for errors.

Now I saved it from 3d as side view, its working fine.

Re: object saving problem in embedded library

Roopa A — Fri, 12 Jun 2020 11:53:15 GMT

The object which I saved as object(.gsm) file, it is opening in one file, but when I try to open that in other main file where I want this object, It;s not coming, it's showing as invalid 3D symbol, open the library part for editing and check its 3D script for errors.

Why it is showing this??

Last time I saved the same file and it opened fine. But when I done the changes and saved the same file, its not opening. Its showing the error.

Where I went wrong?

Please help me out in this..

Thank you,

Roopa A

Re: object saving problem in embedded library

Barry Kelly — Mon, 15 Jun 2020 01:03:33 GMT

Roopa wrote:
The object which I saved as object(.gsm) file, it is opening in one file, but when I try to open that in other main file where I want this object, It;s not coming, it's showing as invalid 3D symbol, open the library part for editing and check its 3D script for errors.

Why it is showing this??

Are there any CALL commands where it is calling in another GDL file?
If so then you need to load all of these files in a library used by your new file (i.e. the embedded library or some other 'loaded' library).

Barry.

Re: object saving problem in embedded library

Roopa A — Mon, 15 Jun 2020 05:19:01 GMT

This is model I want. Which is created using 3 objects.
I loaded that object in new file, still it is not showing 3d.

It is showing this error.

I have loaded the image.

Please help me.

Re: object saving problem in embedded library

Roopa A — Mon, 15 Jun 2020 05:19:38 GMT

This is the model

Re: object saving problem in embedded library

Barry Kelly — Mon, 15 Jun 2020 09:33:50 GMT

Your main object "Leg-15" is calling another object called "Man Leg".
This "Man Leg" object also needs to be in your loaded or embedded library of any file that you want to use it in.

Also I have deleted you other post as there is no need to ask the same thing multiple times.
You started asking about it here so I have left this post running.

Barry.

Re: object saving problem in embedded library

Roopa A — Mon, 15 Jun 2020 10:26:27 GMT

No still it is showing the same.

I loaded both hand and man leg object to embedded library.
And reloaded the object, still not coming.

Re: object saving problem in embedded library

Lingwisyer — Tue, 16 Jun 2020 01:33:46 GMT

Does the error still say it cannot find the macro?

Re: object saving problem in embedded library

Barry Kelly — Tue, 16 Jun 2020 01:34:40 GMT

Roopa wrote:
No still it is showing the same.

I loaded both hand and man leg object to embedded library.
And reloaded the object, still not coming.

Has the message about the missing 'man leg' macro gone or is it still there?
If it is still there then I suspect at some stage you did a 'Save as' for the man leg object and that would have changed its internal GUID number (without you knowing).
Objects actually call this number even though in the script it is written as the object name.
If this is the case then with all the objects in the loaded or embedded library, open the main object script (the one that calls all the others) and simply 'Save' it again.
This will reset the link to all of the correct CALLed macro GUID numbers.

Otherwise I get the feeling you will have to share your objects with us so we can have a look.

Barry.