topic Re: Pocket door problem in Libraries & objects

Pocket door problem

mukster — Wed, 24 May 2023 08:40:34 GMT

Archicad 23, MAC platform, When I try to put in a pocket door object, it shows up as a wide opening. Can't adjust it to show as a simple 3; door with the pocket going into the wall. I'm sure there's a simple setting that I just can't find.

Re: Pocket door problem

Lingwisyer — Wed, 16 Sep 2020 01:22:47 GMT

mukster wrote:
simple 3; door with the pocket going into the wall

Not a possible configuration with the default Aus / Int libraries. Can you post a screenshot of the issue as well as what ever library you are using?

Ling

Re: Pocket door problem

Stress Co_ — Wed, 16 Sep 2020 07:52:50 GMT

What door object are you using?
Are you trying to do 3 panels that all pocket into the wall?
This is D1 Pocket 23:

Re: Pocket door problem

Barry Kelly — Wed, 16 Sep 2020 08:19:43 GMT

I think mukster might mean a 3 foot wide door rather then 3 panels - basically as Marc has shown.
But I may be wrong.

mukster,
Can you post an image of the door in plan or 3D with the settings as Marc has shown?
This will give us an idea of what is happening.
As you can see it seems to be working fine for Marc.

Barry.