topic Re: Window Marker and Door Marker in Libraries & objects

Window Marker and Door Marker

Anonymous — Wed, 24 May 2023 10:30:22 GMT

How is it possible to save a windows marker? the ability to load a window marker is quite evident though i have had no luck following the little info there is on how to do this, i know the work arounds such as select all windows and doors and adjusting marker settings accordingly though i want to make my marker permanently there from the drop down.

I have searched and only info i have found is from 2011, please help.

Currently using Archicad 19 (Edu) on Mac OS 10.11.4

Re: Window Marker and Door Marker

Laszlo Nagy — Mon, 02 May 2016 10:47:08 GMT

To create, for example, a new Window Marker:

1. Activate the Window\Toolbars\Edit GDL Library Parts menu command.
2. Click the Open Object by Subtype button.
3. In the appearing Dialog, to the following level of the hierarchy:
General GDL Object\Documentation Element\Drawing Symbol\Marker\Window-Door-Skylight Marker\Window Marker\
and select one of the available Markers, then click the Open button.
4. Activate the File\Save As menu command and save it under a new name, either into on of your linked libraries or into the Embedded Library.
5. Make your modifications to it.
6. The marker should be available in the Marker drop-down list of the Dimension panel of the Window Settings Dialog.

Re: Window Marker and Door Marker

Anonymous — Mon, 02 May 2016 19:27:46 GMT

I had tried this previously without success, but realised i needed to tick off "placeable" instead of "use as subtype" for it to work, thank you very much, all is well.

[/img]

Re: Window Marker and Door Marker

Llian — Thu, 09 Jun 2016 00:24:26 GMT

How do I set the bubble W01 to top and the sill to bottom of the wall? I tried the flip but it is flipping the whole window. All I want is to reverse the marker so that the W01 is on the above the window?

Re: Window Marker and Door Marker

Llian — Thu, 09 Jun 2016 01:01:23 GMT

OK..I found it in the setting - FLIP

Re: Window Marker and Door Marker

naomihansen — Fri, 24 Jun 2016 20:20:00 GMT

I've been hoping for this for a long time and just now decided to search for a fix.
It would be a lot easier to do this as a separate Favorite, but short of that, it worked almost exactly as I was hoping. The only problem is I lost the ability to place the marker dynamically. The little pink handle on the marker is now black instead of pink, and I can't move it. I can change the position parameters, but it's much better to be able to drag it on the drawing.
I probably changed a parameter I was not supposed to change. Any idea which one?

Thanks Laszlo for the write-up.

Naomi

running AC19 on an iMac

Re: Window Marker and Door Marker

Llian — Sat, 25 Jun 2016 00:28:58 GMT

i have found the solution...it's in the marker type and there is a settion in there to flip for marker ...different from the flip for window orientation.

Re: Window Marker and Door Marker

Dave Jochum — Sat, 25 Apr 2020 01:43:59 GMT

LaszloNagy wrote:
To create, for example, a new Window Marker:

1. Activate the Window\Toolbars\Edit GDL Library Parts menu command.
2. Click the Open Object by Subtype button.
3. In the appearing Dialog, to the following level of the hierarchy:
General GDL Object\Documentation Element\Drawing Symbol\Marker\Window-Door-Skylight Marker\Window Marker\
and select one of the available Markers, then click the Open button.
4. Activate the File\Save As menu command and save it under a new name, either into on of your linked libraries or into the Embedded Library.
5. Make your modifications to it.
6. The marker should be available in the Marker drop-down list of the Dimension panel of the Window Settings Dialog.

Lazlo--I'm pulling my hair out working through this. The settings done in this manner do not stick--at all. Either there is more to the story or there is missing info.

Re: Window Marker and Door Marker

Laszlo Nagy — Sat, 25 Apr 2020 14:05:30 GMT

Hi Dave,

It works for me. What is it exactly that does not work for you?
Do you save it to the Embedded Library?
Is the new Window Marker available in the Dimension Marker panel of the Window Settings Dialog?
Does it have the settings you set as default in the Edit Library Part Dialog?

A screenshot or two would also be helpful.

Re: Window Marker and Door Marker

Dave Jochum — Sun, 18 Feb 2024 16:08:37 GMT

Lazlo,
I've saved the marker and it's always available to choose. The problem is that the marker size is never correct (always 73.7 instead of 26 pt) nor is the pen used (always 1 instead of 3). Every other custom setting is correct--font, font size and width, marker shape, positions, offsets, etc. Even overrides. See images.

Re: Window Marker and Door Marker

Laszlo Nagy — Sun, 03 May 2020 22:49:58 GMT

I don't know the reason for this behavior, so I have reported it to GRAPHISOFT as a bug.

Re: Window Marker and Door Marker

Minh Nguyen — Tue, 05 May 2020 08:49:32 GMT

Dave wrote:
Lazlo,
I've saved the marker and it's always available to choose. The problem is that the marker size is never correct (always 73.7 instead of 26 pt) nor is the pen used (always 1 instead of 3). Every other custom setting is correct--font, font size and width, marker shape, positions, offsets, etc. Even overrides. See images.

Hi Dave,

Thank you for your question and I am sorry about the issue!

May I ask for a test PLA file from you, in which I can find the problematic custom marker for a closer look and comparing with my version? Let me know if you'll need a secure link to send the file to me. Thank you very much for your help!

Looking forward to hearing from you soon!

Best regards,
Minh