https://community.graphisoft.com/t5/Libraries-objects/Door-Does-Not-Show-in-Section/m-p/261114#M8254 Michael:<BR /> <BR /> Your image is not showing, you may need to upload again.<BR /> <BR /> David Mon, 22 Feb 2016 13:07:42 GMT David Maudlin 2016-02-22T13:07:42Z https://community.graphisoft.com/t5/Libraries-objects/Door-Does-Not-Show-in-Section/m-p/261113#M8253 <DIV class="actalk-migrated-content"><T>Please refer to attachment. I have a door that shows in 3D and in elevation but not in section. I can "see" it highlighted in green in section if I select it but cannot figure our how to get it to show properly. Selecting "Move to Front" does not effect it. <BR /> <BR /> Just prior to it not showing in section, I had used the axe tool to split the thickened slab edge twice below the door so that I could change the slab edge piece left between the two splits to a slab edge profile that is appropriate for under a door (i.e., wood blocking etc.).<BR /> <BR /> Thanks in advance for any assistance.</T></DIV> Wed, 24 May 2023 08:47:50 GMT https://community.graphisoft.com/t5/Libraries-objects/Door-Does-Not-Show-in-Section/m-p/261113#M8253 Anonymous 2023-05-24T08:47:50Z https://community.graphisoft.com/t5/Libraries-objects/Door-Does-Not-Show-in-Section/m-p/261114#M8254 Michael:<BR /> <BR /> Your image is not showing, you may need to upload again.<BR /> <BR /> David Mon, 22 Feb 2016 13:07:42 GMT https://community.graphisoft.com/t5/Libraries-objects/Door-Does-Not-Show-in-Section/m-p/261114#M8254 David Maudlin 2016-02-22T13:07:42Z