https://community.graphisoft.com/t5/Libraries-objects/Stair-settings-FLR-PLN-display/m-p/294664#M9346 <DIV class="actalk-migrated-content"><T>Hello ArchiCAD friends...<BR /> <BR /> I've been using ArchiCAD for about 7 years now and I'e run into a strange problem. In ArchiCAD 19 I have floor/slab height change on the same story (1st story) of about 2'-6"... I tried to put in a stair with 4 risers (6") and treads of 10" (not that that matters) but when the stair is placed it shows 6 risers, numbering 4 as specified before the cut line begins.<BR /> <BR /> So... 1, there shouldn't be a cut line, 2 being the biggest problem, the graphic floor plan display is wrong.<BR /> It is not a custom stair, just a library stair with rise/run settings.<BR /> <BR /> Any help would be much appreciated.<BR /> Let me know if any other info is needed?</T></DIV> Sun, 06 Sep 2015 22:50:17 GMT Anonymous 2015-09-06T22:50:17Z https://community.graphisoft.com/t5/Libraries-objects/Stair-settings-FLR-PLN-display/m-p/294664#M9346 <DIV class="actalk-migrated-content"><T>Hello ArchiCAD friends...<BR /> <BR /> I've been using ArchiCAD for about 7 years now and I'e run into a strange problem. In ArchiCAD 19 I have floor/slab height change on the same story (1st story) of about 2'-6"... I tried to put in a stair with 4 risers (6") and treads of 10" (not that that matters) but when the stair is placed it shows 6 risers, numbering 4 as specified before the cut line begins.<BR /> <BR /> So... 1, there shouldn't be a cut line, 2 being the biggest problem, the graphic floor plan display is wrong.<BR /> It is not a custom stair, just a library stair with rise/run settings.<BR /> <BR /> Any help would be much appreciated.<BR /> Let me know if any other info is needed?</T></DIV> Sun, 06 Sep 2015 22:50:17 GMT https://community.graphisoft.com/t5/Libraries-objects/Stair-settings-FLR-PLN-display/m-p/294664#M9346 Anonymous 2015-09-06T22:50:17Z