topic Re: Lost Door, Window jamb/sill 2D drawing in Plan View in Licensing

Lost Door, Window jamb/sill 2D drawing in Plan View

Anonymous — Thu, 25 May 2023 16:16:37 GMT

Hi
I have lost the Door/Window detail drawings in Plan View ... The door panel thickness is just a line and the Jambs for doors and windows do not show up in the Plan View.
I am using the US version but have changed the setting to get millimeters for international.

Re: Lost Door, Window jamb/sill 2D drawing in Plan View

Thomas Holm — Tue, 04 Dec 2007 18:39:42 GMT

I'd guess you've either a changed the floor plan scale to something smaller (like 1:50 ->1:100), or changed the display settings from Cut or Projected to Symbolic.

Re: Lost Door, Window jamb/sill 2D drawing in Plan View

Anonymous — Tue, 04 Dec 2007 19:39:45 GMT

Yes, sounds like scale-sensitive option is on in the door settings.

Re: Lost Door, Window jamb/sill 2D drawing in Plan View

Anonymous — Tue, 04 Dec 2007 23:27:27 GMT

You guys are SUPER

Re: Lost Door, Window jamb/sill 2D drawing in Plan View

Anonymous — Tue, 11 Dec 2007 00:51:11 GMT

Ebbie! Were your doors and jambs displaying as "detailed" i.e., with the door thickness and jambs previously???? And then one day they became lines? And you did not change the drawing's scale?

I would be very interested to find out if this has happened to you. My office has experienced this sort of thing very recently, and I'm trying to sniff out whether it's worth sending off to Hungary....

What has happened, as far as I can tell, is that at some time the door parameters got changed from "Detailed" to "Scale sensitive" seemingly by itself.

please let me know!
Zoll

And oh yes, Stuart and Thomas Holm are super!