topic HELP! Error with shading in Sustainable design

HELP! Error with shading

Anonymous — Thu, 11 May 2023 08:44:24 GMT

Hello

When I use any type of shading device in my project, simulation does not work!
I get the message "Offset values in shading schedule invalidates shading, fin, constraints ((90 >= eth + offset >= 0) > (90 >= thorn + offset >= 0))."

Problem can be solved if I select "Solar Analysis off" for some openings. But it will affect the results of a simulation

What should I do?

Re: HELP! Error with shading

Miklos Sved — Mon, 28 Jul 2014 13:29:24 GMT

Hi aleksey51,

Please upload the file in question here:
https://graphisoft.sharefile.com/r/re9acd26ed9348de8

aleksey51 wrote:
Hello

When I use any type of shading device in my project, simulation does not work!
I get the message "Offset values in shading schedule invalidates shading, fin, constraints ((90 >= eth + offset >= 0) > (90 >= thorn + offset >= 0))."

Problem can be solved if I select "Solar Analysis off" for some openings. But it will affect the results of a simulation

What should I do?

GSHQ Technical Support will investigate it.

Best Regards,

Re: HELP! Error with shading

Anonymous — Wed, 30 Jul 2014 09:35:43 GMT

Thank you very much!

Re: HELP! Error with shading

Anonymous — Sat, 02 Aug 2014 12:54:29 GMT

Hello

I found another problem in the file which I uploaded. In simulation report values for net energy for heating and cooling are zero! I posed maximum and minimum temperatures in the schedule respectively 26 and 19C, and added heating and ventilation systems. However, the values are zero, and I can not understand why. Previously was everything ok! Is it possible that these problems occur due to hardware?

I have to hand over my project soon, but I still don’t get the correct results! H E L P!