Cannot load .e57 Point Cloud as a .lcf file to the teamwork project in Archicad 28

HSA Architektura — Wed, 09 Apr 2025 16:26:37 GMT

I'm preparing the point cloud for a large project, I've placed it in local file and it worked fine, but once I've tried to export .lcf file created in archicad into BIMcloud it fails. I wanted to try workaround it by migrating the local file into the BIMcloud, but it not only failed, but also messed up libraries as whole:

Before my attempt at export to Teamwork it was more or less basic archicad file set on the basic TPL28,

after, it is a mess.

In the Teamwork project, that I've based on my own TPL file, fortunetly nothing yet happened to the libraries, but:

"Sending Library Failed" prompt appears.

I'm not sure what might be the issue, however thing that happened to my local file bothers me a lot, I don't want to risk Libraries meltdown in Teamwork when uploading .e57 file, especially though we're starting 2 big projects requiring Point Cloud checkups and creation of an As Built models.

Any suggestions as to what can I do to prevent this behaviour will be appreciated!

topic Cannot load .e57 Point Cloud as a .lcf file to the teamwork project in Archicad 28 in Teamwork & BIMcloud

Cannot load .e57 Point Cloud as a .lcf file to the teamwork project in Archicad 28