https://community.graphisoft.com/t5/Visualization/Vectorial-hatching-positioning/m-p/205740#M12697 In the 3D window use the Align texture option under the Design Menu. There is a recent post with this answer. Wed, 05 Nov 2008 13:44:16 GMT Eduardo Rolon 2008-11-05T13:44:16Z https://community.graphisoft.com/t5/Visualization/Vectorial-hatching-positioning/m-p/205739#M12696 <DIV class="actalk-migrated-content"><T>Is it possible to adjust the origin level of a vectorial hatch?<BR /> <BR /> I have created a basic custom fill (horizontal lines, 1200mm apart) and it is assigned to my external wall material. My building has a 900mm high concrete plinth starting from +0.000 but my hatch also starts at +0.000 which means that after the plinth I am left with a 300mm gap and then my 1200mm gaps continue after this.<BR /> <BR /> If I could raise the starting height of my hatch by 900mm this would solve my problem!<BR /> <BR /> Any help would be gratefully received!<BR /> <BR /> James</T></DIV> Thu, 11 May 2023 13:55:15 GMT https://community.graphisoft.com/t5/Visualization/Vectorial-hatching-positioning/m-p/205739#M12696 Anonymous 2023-05-11T13:55:15Z https://community.graphisoft.com/t5/Visualization/Vectorial-hatching-positioning/m-p/205740#M12697 In the 3D window use the Align texture option under the Design Menu. There is a recent post with this answer. Wed, 05 Nov 2008 13:44:16 GMT https://community.graphisoft.com/t5/Visualization/Vectorial-hatching-positioning/m-p/205740#M12697 Eduardo Rolon 2008-11-05T13:44:16Z