topic Re: Aligning Textures in Visualization

Aligning Textures

Thu, 11 May 2023 11:01:34 GMT

Nik,

set origin for texture for each wall to same base point, in 8.5 open 3D window select walls >Edit > Align 3D texture > Set Origin - click base point on corner.

regards,
Scott Boyd Turner

Re: Aligning Textures

Tue, 07 Dec 2004 04:12:40 GMT

Nik,

set origin for texture for each wall to same base point, in 8.5 open 3D window select walls >Edit > Align 3D texture > Set Origin - click base point on corner.

regards,
Scott Boyd Turner

Re: Aligning Textures

Dwight — Tue, 07 Dec 2004 06:44:15 GMT

forget?

Re: Aligning Textures

Anonymous — Tue, 21 Dec 2004 01:38:47 GMT

Hey guys.. The above solution didn't help me here.. I am stumped!

Thanks

Re: Aligning Textures

Anonymous — Tue, 21 Dec 2004 02:27:06 GMT

Eliminate eave?

Re: Aligning Textures

Aussie John — Tue, 21 Dec 2004 02:49:52 GMT

im guessing the eave is a separate library part. Unfortunately set the origin doesnt apply to objects. The 3D script needs is the coor and vert commands - Good luck as the manual is fairly unhelpful in this.

The simpler option is to extend the roof and SEO the roof part of the eave

Re: Aligning Textures

Dwight — Tue, 21 Dec 2004 02:52:32 GMT

The ATKIQuikFix™ for this is to create another material with texture mapped at 90 degrees to the original. It still won't be originated correctly [unless by coincidence] but it will run the right way at least.

Re: Aligning Textures

Dwight — Tue, 21 Dec 2004 02:53:46 GMT

Or make an eave element that doesn't include the roof portion, letting that be continuous with the actual roof....

Re: Aligning Textures

Anonymous — Tue, 21 Dec 2004 03:26:14 GMT

Thanks Guys for the help... Well, I tried all options with the part.. No luck.. The new material idea would drive me nuts being slightly off even if only I knew (and Dwight.. ) So I just extended the roof overhang.. thankfully it stays "in front" of the Eave part..

The Author must have tested this? I tell you slowly I am realising it is best to do all possible with native AC tools and Libraries..

Thanks Again!

Re: Aligning Textures

Anonymous — Tue, 21 Dec 2004 03:52:09 GMT

May I ask another.. what is this line with the little tick mark on all my roof planes?

Re: Aligning Textures

Aussie John — Tue, 21 Dec 2004 03:57:32 GMT

that is the pivot and height reference line (underside of roof) (doesnt print). All changes to the roof pitch occur about this line

Re: Aligning Textures

Anonymous — Tue, 21 Dec 2004 03:58:53 GMT

Thanks John.. was just reading that in the heavy book