topic Re: AC8 crashing while importing AutoCAD .dwg file in Collaboration with other software

AC8 crashing while importing AutoCAD .dwg file

Anonymous — Thu, 20 Nov 2003 17:19:50 GMT

Has anyone experienced AC8.3 crashing when importing an AutoCAD drawing, while AC7.3 opens it just fine???

Thanks

Shaz

Re: AC8 crashing while importing AutoCAD .dwg file

David Larrew — Tue, 02 Dec 2003 04:46:21 GMT

If you are running AC 8.0 R3...
You should have received or should soon receive the AC8.1 upgrade.
AC8.1 should work (AC8.0.* had some bugs in the DWG import/export converter).

Re: AC8 crashing while importing AutoCAD .dwg file

Djordje — Tue, 02 Dec 2003 06:00:02 GMT

Shaz wrote:
Has anyone experienced AC8.3 crashing when importing an AutoCAD drawing, while AC7.3 opens it just fine???

8.1 will have solved it.

However, every time that happened to me, the units were set wrongly - e.g. the DWG was in meters, and the Translator was in mm. Check the units - if the DWG comes in too small or too big, then the crash is probable.

Re: AC8 crashing while importing AutoCAD .dwg file

Anonymous — Thu, 19 Feb 2004 03:41:31 GMT

8.1 crashes when opening a dwg. It is next to unusable
The same dwg opens in 7 with no problems

Re: AC8 crashing while importing AutoCAD .dwg file

TomWaltz — Thu, 19 Feb 2004 10:27:35 GMT

strange... I opened 6 dwg's in 8.1 with no problem. Guess it must be usable,

What translator settings are you using? The "Default" translator has a few things in it that I found were troublesome, like Djordje said, often with the units.

Re: AC8 crashing while importing AutoCAD .dwg file

Anonymous — Fri, 20 Feb 2004 17:07:07 GMT

All what I have to say is that I newer had a problem with a DWG in 7 and I have plenty of crashes trying to open them in 8.1 Most of these drawings are created in ACAD2000 and yes the unit measure is all over the place but this should not be a problem as was not in 7.
At the moment I open all in 7 because that works.

Re: AC8 crashing while importing AutoCAD .dwg file

Djordje — Sat, 21 Feb 2004 06:06:17 GMT

Adalbert wrote:
All what I have to say is that I newer had a problem with a DWG in 7 and I have plenty of crashes trying to open them in 8.1 Most of these drawings are created in ACAD2000 and yes the unit measure is all over the place but this should not be a problem as was not in 7.
At the moment I open all in 7 because that works.

Besides the units (you should set the same units in Translator before opening) also check where the origin is; if it is light years away, that also might be a problem.