https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195728#M23915 I use Smart Parts, have for years. I started back when Ac wouldn't even give you control of the trim. SO, I am not really that familiar with AC's windows and doors. I did change over to AC's cabinets. I like them, and never upgraded SmartPart's version.. so I can't say much comparing them either. I use a few of the Trim library, but not much. He has a nice trim that you can set at a slope, which I use for rake trim.<BR /> <BR /> I'll attach a schedule I generate so you can see the results. It does list ganged as one unit. I manually fill in the "single" or "twin" note. Same with the doors, I fill in the interior and exterior. Those fields are actually the ID field. Thu, 19 Mar 2009 19:37:58 GMT Rick Thompson 2009-03-19T19:37:58Z https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195726#M23913 <DIV class="actalk-migrated-content"><T>For AC 12 what add on or door/window package would people recommend. I'm upgrading from version 10 to AC 12 and would like to take my 3d modeling to the next level. In the past I have always had issues trying to use the standard graphisoft doors/windows with units that need to be ganged together either horizontally or vertically in order to call them out in the interactive schedule as one unit and not have to explode the schedules. Its also very frustrating to get the trim and sill conditions to look right in both 3d and 2d. I was looking into purchasing the Residential Collection from D3 that includes the doors/windows, 3d trim, as well as the 3d kitchen/bath package all in one for $299. Any recommendations on whether or not this would solve some of the previous issues I mentioned, in regard to also upgrading to version 12. If not, what do people do in order to accomplish this?</T></DIV> Thu, 19 Mar 2009 10:32:20 GMT https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195726#M23913 Anonymous 2009-03-19T10:32:20Z https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195727#M23914 I can't recall if smart parts can list ganged windows as one ID. Did you query DDGI? Thu, 19 Mar 2009 17:31:29 GMT https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195727#M23914 Erika Epstein 2009-03-19T17:31:29Z https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195728#M23915 I use Smart Parts, have for years. I started back when Ac wouldn't even give you control of the trim. SO, I am not really that familiar with AC's windows and doors. I did change over to AC's cabinets. I like them, and never upgraded SmartPart's version.. so I can't say much comparing them either. I use a few of the Trim library, but not much. He has a nice trim that you can set at a slope, which I use for rake trim.<BR /> <BR /> I'll attach a schedule I generate so you can see the results. It does list ganged as one unit. I manually fill in the "single" or "twin" note. Same with the doors, I fill in the interior and exterior. Those fields are actually the ID field. Thu, 19 Mar 2009 19:37:58 GMT https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195728#M23915 Rick Thompson 2009-03-19T19:37:58Z https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195729#M23916 AS far as the rake trim goes.. this shot is an example, and the bracket is from the Smartparts library. Thu, 19 Mar 2009 19:49:00 GMT https://community.graphisoft.com/t5/Collaboration-with-other/D3-Real-Doors-Windows/m-p/195729#M23916 Rick Thompson 2009-03-19T19:49:00Z